Coal and power generation dust control

DustBoss mist cannons on trailers or towers control the coal dust released during stackout, transport and storage at power plants.

DustBoss cannon misting over a coal stockpile under a conveyor at a power plant, with workers nearby

For power plants and facilities that handle large amounts of coal every year, managing dust emissions is a priority. Coal dust is a safety hazard and an environmental nuisance, and it can increase equipment maintenance costs. According to BossTek, agencies such as OSHA and MSHA in the United States have stepped up enforcement of dust emission standards as research points to long-term health effects of fugitive dust. A dust management strategy helps protect workers and maintain good relations with surrounding communities.

Fugitive dust is generated during stackout, transport and storage of coal. Activity on site and environmental factors such as wind disturb the material and lift particles into the air. Of the many techniques available, misting cannons have become the predominant method, according to BossTek, for their ease of use, cost-effectiveness and proven results.

How DustBoss controls coal dust

DustBoss cannons use atomized mist technology to trap dust and drive it to the ground, at the points where coal is moved and stored.

  • Several cannon sizes. DustBoss offers cannons with different throws to match the size of the stockpile or work area.
  • Trailer mounting. On trailers, the cannons move around the site as stockpiles and work areas change. Fusion units carry their own diesel genset.
  • Tower mounting. Raised on towers, the cannons gain an elevated angle of attack over stockpiles, unloading areas and haul roads.

Coal handling areas

The photos BossTek publishes for this application show DustBoss equipment at power plants and coal operations:

  • Coal stockpiles built by stacker conveyors.
  • Loading of trucks with wheel loaders at the stockpile.
  • Entrances to coal handling buildings and unloading areas.
  • Haul roads and dump areas used by mining trucks.

Telemet support

Telemet’s team works with BossTek to recommend the right machine and configuration for each site and to support it in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

Equipment used

DustBoss DB-60 on its carriage controlling dust at a demolition site

Telemet Green

BossTek

DustBoss DB-60

DustBoss DB-60 dust control cannon: 60 m throw, 30,000 cfm fan and a wheeled carriage; up to 11,612 m² of coverage with 359° oscillation.

View product

View service

DustBoss DB-100 on its skid spraying mist over a stockpile

Telemet Green

BossTek

DustBoss DB-100

DustBoss DB-100 dust control cannon for the largest sites: 100 m throw, 359° oscillation as standard and up to 31,000 m² of coverage.

View product

View service

DustBoss DB-100 Fusion with genset and cannon on its trailer

Telemet Green

BossTek

DustBoss DB-100 Fusion

DustBoss DB-100 Fusion dust control cannon: the DB-100 with a 90 kW diesel genset on a roadworthy trailer, 100 m throw and about 32 hours of runtime.

View product

View service

DustBoss DB-100 on a tower suppressing dust on a petcoke stockpile at a port

Telemet Green

BossTek

DustBoss Tower Systems

DustBoss tower systems raise a misting cannon on a galvanized steel tower up to 6.1 m high to extend the throw and form a mist barrier over dust sources.

View product

View service

DustBoss DB-60 Fusion with genset and cannon on its trailer at an industrial site

Telemet Green

BossTek

DustBoss DB-60 Fusion

DustBoss DB-60 Fusion dust control cannon: the DB-60 with a 45 kW diesel genset on a roadworthy trailer, 60 m throw and about 48 hours of runtime.

View product

View service

Discuss this application

Tell us about the site and the work you need to do. A specialist will recommend the right equipment and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket