The BeachTech 3000 beach cleaner combines beach cleaning and hauling in one towed machine. The Facelift version, built from the 2025 series, keeps the two-belt vibrating screening system and adds redesigned hydraulics with a CAN bus control system and a waterproof display. It cleans down to 30 cm over a working width of 2,500 mm, covers up to 30,000 m²/h and holds 4.7 m³ between its collection hopper and its aluminum dump body, so it makes few trips to the unloading point. It requires a tractor from 74 kW (100 hp).
Applications
- Large beaches and wide, open sand areas where area performance and load capacity matter most.
- Resorts, municipalities and private contractors in charge of beach cleaning.
- Dry, wet or heavy sand, by switching between the screening, raking and mixed technique.
Key features
- Two-belt screening system. Sand and debris are conveyed onto the first screening belt, where clean sand falls back to the beach through vibration; the debris moves on to the second belt and into the collection hopper.
- Cleaner and hauler in one. The 0.7 m³ hopper empties into a lightweight 4.0 m³ aluminum dump body, which removes trips to external containers; according to the manufacturer, this reduces fuel consumption and raises productivity.
- Lower PTO speed. Optimized drive technology cut the required PTO speed from 1,000 to 540 rpm, which BeachTech says saves fuel and reduces emissions.
- Waterproof display. It shows operating hours, oil temperature and error messages in real time, and controls the pick-up speed, the screening belt and pick-up on/off and the screen belt reverse from the tractor. A joystick, depth control wheels and a rotating beacon can be connected later, and the system is ready for telemetry and field software updates.
- Spring-tine pick-up. A hydraulic cylinder adjusts the spring tines so the operator can move continuously between raking, screening and mixing.
- Safety and service. EU type approval under Regulation 167/2013, a ball valve and shackles to secure the screening cassette for road travel, new steps and handles for maintenance work, and LED lights as standard for night work.
- Tires and finisher. Wide low-pressure flotation tires keep ground pressure low so the machine carries heavy loads without sinking; the finisher comb smooths the sand and leaves a grooved pattern.
Technical data
| Cleaning method | Patented raking, screening and mixed technique; two-belt vibrating screen |
|---|---|
| Working width | 2,500 mm (8 ft 2 in) |
| Area coverage | Up to 30,000 m²/h (7.4 acres/h)* |
| Working depth | Up to 30 cm (12 in)* |
| Capacity | Collection hopper 0.7 m³ (0.9 yd³) and dump body 4.0 m³ (5.3 yd³): 4.7 m³ in total |
| Dump body unloading height | 1,550 mm (5 ft 1 in) |
| Road transport dimensions (L × W × H) | 5,700 × 2,700 × 3,950 mm; 7,000 mm long and 2,400 mm high in operation |
| Empty weight | 3,200 kg (7,055 lb) |
| Permissible total weight | 6,500 kg (14,330 lb), according to local traffic regulations |
| Tractor required | From 74 kW (100 hp), four-wheel drive and differential lock; PTO 540 rpm (1,000 rpm possible); drawbar eye coupling Ø 40 mm; drawbar load 1,600 kg |
| Speed | Up to 12 km/h working*; 40 km/h on the road |
| Tires | Low-pressure, 500/60-22.5 |
* Depending on soil and beach conditions.
Versions and accessories
The equipment list includes individually replaceable spring tines, screening belts in various mesh sizes, eccentric shafts, maintenance-free bearings and a reversing valve that can now be controlled from the driver’s seat. It also lists a camera system for the pick-up shaft and collection hopper, depth control wheels, wind screens on the sides of the screening belts, an LED beacon, a joystick, a spraying device with water tank for dust reduction in dry sand, and a cover net for the dump body.
Telemet support
Telemet’s team works with BeachTech to advise on the right configuration for each operation and to support the BeachTech 3000 in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




