DustBoss DB-60 Surge

DustBoss DB-60 Surge dust control cannon: center nozzle jet that cuts through wind, 60 m throw, 260° oscillation and three flow stages.

The DustBoss® DB-60 Surge® is a dust control cannon with a center nozzle that applies high-powered jets of water, built to fight through the wind and reach dust rising high above the ground. The spray pattern changes instantly from a jet stream to fog dispersion, so the same machine stops dust at height and dust that tries to drift off site. A three-stage system combines the center nozzle and an outer misting ring for different flow levels, custom oscillation ranges are set with a few button presses, and a remote now controls the full system. Options include filters for non-potable water, the Quick Release Manifold for nozzle maintenance, skid and tower mounts and Fusion versions with an on-board power source.

Technical summary

Throw 60 m (200 ft)
Oscillation and coverage 260° standard, with custom ranges: 8,432 m² (90,757 ft²)
Water flow by stage Outer spray ring: 64–163 l/min (17–43 gpm); center nozzle: 114–284 l/min (30–75 gpm); ring and nozzle: 159–416 l/min (42–110 gpm)
Fan drive Direct-drive motor; VFD to control throw at lower water pressure
Standard mount Two-wheeled trailer; other mounts available
Remote control range 305 m (1,000 ft)

Video

More information

DustBoss DB-45 Surge datasheet

Datasheet

en

DustBoss DB-60 Surge datasheet

Datasheet

en

Compatible equipment

Related equipment and services

DustBoss Surge Fusion genset and cannon firing a water jet

Telemet Green

BossTek

DustBoss Surge Fusion

DustBoss Surge Fusion dust control cannon: Surge center nozzle jet with its own diesel genset on a trailer, 60 m throw, in DB-45 and DB-60 versions.

View product

View service

DustBoss DB-60 on its carriage controlling dust at a demolition site

Telemet Green

BossTek

DustBoss DB-60

DustBoss DB-60 dust control cannon: 60 m throw, 30,000 cfm fan and a wheeled carriage; up to 11,612 m² of coverage with 359° oscillation.

View product

View service

DustBoss Center Nozzle Retrofit Kit spraying a jet inside the misting ring of a cannon

Telemet Green

BossTek

DustBoss Center Nozzle Retrofit Kit

DustBoss center nozzle retrofit kit for DB-60 cannons: a high-flow nozzle with a 36 m throw that cuts through wind, installed with PDF or video instructions.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket