The Kodiak HD 3036 snow blower is the hydraulically driven model of Kodiak America’s loader mount range (LMHD). It is a two-stage blower that mounts on the front of a wheel loader and runs off the carrier’s hydraulics, so it has no engine of its own. This makes it the lightest model in the range, at 4,500 lb, and suitable for loaders from 1.1 yd³. Kodiak America rates it in the 1,200 TPH performance class, with a volumetric capacity of 1,920 yd³/h and a casting distance of up to 30 m (100 ft).
Applications
- Snow removal with smaller wheel loaders, without adding a second engine to maintain.
- Loading snow into trucks, with a truck loading height of up to 3.4 m (11 ft) and a spot chute whose height the buyer defines to suit the height restrictions of its storage facility.
- Work at altitude: the specification sheet gives an elevation of up to 3,658 m (12,000 ft).
Key features
- Hydraulic drive. A 75 cc motor with an open-center, pilot-operated valve runs off the loader’s hydraulics; the sheet lists a 5 gpm auxiliary hydraulic pump.
- Two stages. First stage with 30 in helical ribbons, serrated for ice cutting, in one right- and left-hand assembly with two wiper rings; second stage with a 36 in impeller with at least four Hardox 450 fan blades.
- Hardox 450 throughout. Hardox 450 or equal on all steel plate of the blower head, for wear resistance and strength; Kodiak specifies no mild steel. Side plates are 1/4 in Hardox 450.
- Overload protection. Shear pin or torque clutch protection on each side of the center drive gearbox, to each ribbon and before the motor.
- Directional casting. The volute rotates 150° to the right and to the left, and the truck loading spot chute rotates 270°.
- Weatherproof electrics. All electrical connections are plug-in, quick-disconnect and waterproof, with the wiring encased in loom.
- Replaceable wear parts. One-piece Hardox scraper blade, two adjustable Hardox 450 skid shoes and cutter bar extensions on each side.
Technical data
| Performance class | 1,200 TPH (tons per hour) |
|---|---|
| Volumetric capacity | Approx. 1,470 m³/h (1,920 yd³/h) |
| Casting distance | Up to 30 m (100 ft) |
| Drive | Hydraulic, from the carrier loader |
| Working width | 2,591–2,743 mm (102–108 in) |
| Working height | 1,118 mm (44 in) |
| Ribbon diameter | 762 mm (30 in) |
| Impeller diameter | 914 mm (36 in) |
| Gearboxes | Kodiak 175 right-angle and center drive, 4.09:1 |
| Weight | Approx. 2,041 kg (4,500 lb) |
| Minimum loader size | 0.84 m³ (1.1 yd³) |
| Maximum elevation | 3,658 m (12,000 ft) |
Versions and accessories
Cutter bars are available at heights of 2.4 or 3.7 m (8 or 12 ft). According to Kodiak’s spec table, the working width can be extended by 6–12 in (152–305 mm) and the truck loading height with a telescoping chute. Drivelines are by Spicer.
Telemet support
Telemet’s team works with Kodiak America to advise on the right configuration for each operation and to support the Kodiak HD 3036 in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
