The Kodiak runway sweeper is a truck-mounted broom system for airport runways. It combines a high-speed broom head, carried on a parallel-lift, quick-disconnect truck hitch, with an auxiliary power unit that drives an air blast assembly. The broom is hydrostatically driven and its weight stays centered on the chassis at all angles, while the air blast covers the complete swept path. Kodiak America offers the power unit from 300 to 700 HP and brushes from 4.3 to 7.3 m (14 to 24 ft) long.
Applications
Sweeping airport runways, where the broom and the air blast work together: the air flow is interlocked with the broom controls and covers the whole swept width. For transport between work areas, the air ducts lift up for clearance.
Key features
- Hydrostatic broom head. Heavy-duty welded construction, with a dual-motor end drive or a single-motor center drive.
- Follows the surface. Side-to-side oscillation of 8° and casters with 360° rotation and a shimmy dampener, on dual 18x7x8, 16-ply tires.
- Tool-less adjustment. The brush pattern is adjusted without tools.
- Air blast unit. Dual impeller with left- and right-hand nozzles, a volume rating of 24,000 CFM and air velocity of up to 724 km/h (450 mph).
- Quick hitch. Parallel «lift to attach» design, quick disconnect with no tools required and a weight transfer system for attachments.
- Engine power unit. Electronically controlled, turbocharged and charge-air cooled, with a flywheel-mounted two-pad pump drive, heavy-duty fan and radiator, dual-element air cleaner with pre-cleaner and a fully enclosed engine compartment with doors.
- Controls in the cab. Up/down, left/right, hitch lift and deflector are within easy reach; the pressure-compensated hydraulic system uses components to SAE standards and motors with a hot oil shuttle valve.
Technical data
| Brush length | 4.3–7.3 m (14–24 ft) |
|---|---|
| Brush diameter | 914 or 1,168 mm (36 or 46 in) |
| Brush type | Segments of 495 mm (19-1/2 in) inner diameter, with spacers |
| Bristles | Poly and/or crimped wire |
| Brush cores | Welded tubular steel, dual-core design with minimal center gap |
| Broom drive | Hydrostatic, dual-motor end drive or single-motor center drive |
| Broom oscillation | 8° side to side |
| Air blast volume | Approx. 680 m³/min (24,000 CFM) |
| Air velocity | Up to 724 km/h (450 mph) |
| Engine power unit | 300–700 HP (224–522 kW) |
Versions and accessories
The sweeper is configured by broom drive (end or center drive), brush length and diameter, bristle type and engine power. Kodiak America reserves the right to change specifications and recommends consulting the factory for further information.
Telemet support
Telemet’s team works with Kodiak America to advise on the right configuration for each operation and to support the Kodiak Runway Sweeper in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

