PistenBully 600 Polar W

PistenBully 600 Polar W snow groomer for steep slopes: ActiveWinch 4.6+ with AutoWinch, 4.6 t pulling force and 382 kW EU Stage V engine.

The PistenBully 600 Polar W snow groomer is the winch version of the PistenBully 600 Polar, built for ski resorts whose steep slopes call for winch-assisted grooming. Kässbohrer developed it in close cooperation with customers. According to the manufacturer, its low dead weight, higher power and torque raise its performance, and its 382 kW engine with diesel particulate filter meets EU Stage V. The ActiveWinch 4.6+ with AutoWinch delivers a constant pulling force of up to 4.6 t.

Applications

  • Grooming steep slopes where the winch provides traction, side hold and safety.
  • Pushing and distributing snow with the AllWayBlade Polar, and transporting snow guns with its standard mounting bracket.
  • Pipe work with pipe cutter tools, thanks to the reinforced quick-change system.
  • Moving snow and materials with the Blade Loader, Snow Bucket or Front Snow-Blower attachments.

Key features

  • ActiveWinch 4.6+. Stepless, automatic pulling force of up to 45 kN (4.6 t), 360° unlimited rotation and a capstan drive that keeps pulling force and rope speed constant regardless of the rope left on the storage drum, which adds safety at higher travel speeds.
  • AutoWinch and active steering. AutoWinch matches rope speed to travel speed and raises the pulling force when the tracks slip, with manual override; it protects the rope and relieves the operator. The active winch co-steers to keep the vehicle on track under lateral loads.
  • Power-to-weight ratio. Low dead weight with more power and torque improves climbing ability and thrust.
  • EU Stage V engine. The 6-cylinder Cummins X12 with diesel particulate filter is compact and easy to service. PistenBully states that its diesel vehicles can run on renewable HVO fuel, cutting CO₂ emissions by up to 90 %.
  • Combined implement carrier. SlopeTracer follows the slope in parallel or contour mode and adjusts the milling depth; AutoTracer adds lateral support and countersteers on side slopes.
  • One-hand operation. The 4-axis joystick controls the blade, the attachments, the winch pulling force and the active steering. The 10-inch iTerminal is prepared for SnowSat, and a rear camera gives a clear view behind the winch.
  • Quick-change system. Stronger cylinders, load check valves and hydraulic pipe protection provide the attachment torque needed for snow gun transport; the KFX fast exchange system is available on request.

Technical data

Engine Cummins X12, 6 cylinders, 11.8 l
Power (ECE) 382 kW (512 hp)
Max. torque 2,375 Nm at 1,200 rpm
Emission standard EU Stage V and EPA Tier 4f
Fuel tank 300 l (79 gal)
DEF (AdBlue®) tank 38 l (10 gal)
Fuel consumption From 19.5 l/h (5.15 gal/h)
Speed 0–19 km/h, stepless; 0–17 km/h in winch operation
Climbing ability Up to 100 %
Minimum operating weight 13,490 kg (with CombiPlus tracks, blade and tiller)
Winch pulling force 45 kN (4.6 t), stepless and automatic
Winch rope 11 mm diameter, 1,050 m (1,000 m usable); 1,400 m as an option

Versions and accessories

The PistenBully 600 Polar is the version without winch. Equipment named by the manufacturer for the 600 Polar W includes:

  • AllWayBlade 4.6 m with snowgun holder and AlpinFlexTiller SmartCut 5.5 m; NordicFlexTiller as an option.
  • Tracks: X-Track rubber tracks (975, 1,150 and 1,420 mm), 5-belt steel tracks and 6- or 7-belt CombiPlus tracks (1,648 mm).
  • KFX fast exchange system, strengthened QCS, ProMount, NoDeck version, passenger cabins and a 120 l additional tank.
  • Blade Loader, Snow Bucket and Front Snow-Blower attachments.

Telemet support

Telemet’s team works with PistenBully to advise on the right configuration for each operation and to support the PistenBully 600 Polar W in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

PistenBully 600 Polar W datasheet

Datasheet

en

PistenBully 600 Polar W brochure

Brochure

en

Compatible equipment

Related equipment and services

PistenBully 600 Polar climbing a snow-covered slope with its front blade

Telemet Green

PistenBully

PistenBully 600 Polar

PistenBully 600 Polar snow groomer for alpine slopes: low weight for climbing and thrust, 382 kW EU Stage V engine and operator assistance systems.

View product

View service

PistenBully 800 W pushing snow on a steep slope with the winch rope attached at dusk

Telemet Green

PistenBully

PistenBully 800 W

PistenBully 800 W snow groomer with 4.6 t ActiveWinch 4.6+ and AutoWinch, 450 kW MAN engine and 5.95 m AllWayBlade for steep slopes.

View product

View service

PistenBully tiller with KFX fast exchange system set down on a groomed slope while the groomer drives away

Telemet Green

PistenBully

PistenBully KFX Fast Exchange System

KFX fast exchange system for PistenBully tillers: couples and uncouples the tiller in about 20 s from the cab, saving up to 20 % fuel without it.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket