The PistenBully passenger cabin turns a PistenBully snow groomer into an off-road transport vehicle for people or materials. It is mounted on the loading platform and comes in versions for 5, 8, 10, 15 and 20 persons. The structure combines a robust steel rib frame with GRP components and holds a ROPS certificate for the protection of all passengers. When the cabin is not needed, it can be removed with little effort and the loading platform is fully available again.
Applications
- Transporting staff, guests or materials across any kind of terrain in ski areas.
- Small groups with the 5-person cabin, which carries up to 700 kg and can be fitted to the PistenBully 100 from building year 2009.
- Larger groups with the 10-person cabin (8 or 10 seats, up to 750 kg), for the PistenBully 100, 200, 300, 300 Polar, 400 and 600.
- Expedition work: on the PistenBully 300 Polar Antarctic, a heated and insulated ROPS cabin serves as a workshop, living or sleeping area, or carries five to fifteen people.
Key features
- ROPS-certified structure. The steel rib frame with GRP components gives passengers protection in rough terrain.
- Insulated interior. A hard-wearing non-woven fleece lining provides soundproofing and heat insulation, and the front and rear windows pivot for ventilation.
- Independent heating. A diesel heater with its own fuel tank heats the cabin, draws in fresh air and keeps the windows from fogging.
- Safe access and seating. Entry is on the driver’s side by steps that pull out over the tracks and an access ladder, with a grab bar on the door. Fold-up bench seats have automatic seat belts and holding bars, and the lighting switches on with the door contacts.
- Emergency equipment. An emergency hammer, a fire extinguisher and a hinged roof window that also serves as an emergency exit.
- Contact with the operator. Passengers reach the operator through an intercom with an audible signal.
- Quick mounting. On vehicles prepared for it (reinforced top frames), the cabin is mounted and removed with little effort. With the cabin in place, a snow tiller can still be fitted, with a reduced lifting height.
Technical data
| Versions | 5, 8, 10, 15 and 20 persons |
|---|---|
| Payload, 5-person cabin | Up to 700 kg |
| Payload, 10-person cabin | Up to 750 kg (8 or 10 seats) |
| Payload, 15-person cabin | Up to 1,600 kg |
| Structure | Steel rib frame with GRP components, ROPS certificate |
| Cabin heater | Diesel, separate 10 l tank |
| Ski box (option) | Room for 20 pairs of skis; height 635 mm, width 740 mm, length from 1,850 mm |
Versions and accessories
- Ski box in aluminium plate with four stanchions, for skis and snowboards; it can also hold the Akia and is fitted with two manifolds and one screw each on the cabin underframe.
- Mounting for an Akia inside the cabin.
- Can holder for up to six 20 l cans.
- VIP or special-edition cabin, fitted on request with tinted windows, a high-quality sound system, a flat screen and comfortable seats.
Telemet support
Telemet’s team works with PistenBully to advise on the right configuration for each operation and to support the PistenBully passenger cabins in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




