PowerBully 18T

PowerBully 18T tracked carrier: 16,600 kg payload for cranes, drills and platforms on swampy, hard-to-reach terrain, with X-Track rubber tracks and telemetry.

The PowerBully 18T tracked carrier is a low-ground-pressure platform for mounting superstructures and moving tools, equipment, material and crews across soft, swampy or hard-to-access terrain. Built by Kässbohrer, it carries 16,600 kg (36,600 lb) on its platform, with a gross weight limit of 30,000 kg. Its standard 34 in (864 mm) truck frame width and hydraulic and electrical interfaces make it faster to mount cranes, drills or work platforms, and according to the manufacturer it was the first utility vehicle equipped with telemetry features.

Applications

  • Electric utilities and telecommunications: building, maintaining and repairing power and telecommunication lines in areas that are hard to reach.
  • Pipelines: work on oil and gas pipelines in remote, undeveloped areas.
  • Wildfires: the Magirus FireBull combines firefighting equipment with the all-terrain PowerBully chassis for vegetation fires.
  • Other sectors named in the brochure: wind power, construction, mining, drilling, forestry, emergency response and civil protection.

Key features

  • QuickMount chassis. The standard truck frame width and the hydraulic and electrical interfaces shorten the upfitting of digger derricks, cranes, man lifts or drill rigs; the hydraulic interface makes the full engine power available to the superstructure.
  • X-Track rubber tracks. 1,030 mm tracks with a cleated, herringbone profile grip on steep, muddy slopes while keeping ground pressure low: 0.17 kg/cm² empty and 0.39 kg/cm² loaded.
  • Steel track option. Tracks of high-strength, low-wear fine-grained steel with sharp profile edges and spikes, for high thrust on steep, icy or rocky ground.
  • Off-road ability. 60 % gradeability uphill and downhill, 40 % on side slopes, on-the-spot turning and a fording depth of 1,400 mm.
  • Telemetry. Fleet managers can view component data and GPS position in real time; service technicians can read fault codes and maintenance parameters remotely and prepare before going to the site.
  • Cummins B6.7 engine. 231 kW (310 hp) with high torque at low revs, which the manufacturer pairs with low noise and good fuel economy; Bosch Rexroth hydrostatic drive train.
  • ROPS/FOPS cab. One-person cab with an iTerminal touch display, air conditioning with dust filter, rear-view camera, cruise control, LED work lights front and rear, and electronic control by adjustable steering wheel or dual joystick.

Technical data

Payload on platform 16,600 kg (36,600 lb)
Tare weight with X-Track 13,200 kg (29,100 lb)
Gross weight limit 30,000 kg (66,140 lb)
Engine Cummins B6.7 turbo diesel, 6 cylinders, 6.7 l, EU Stage V / Tier 4f
Power (ECE) 231 kW (310 hp)
Max. torque at 1,500 rpm 1,288 Nm (950 lb-ft)
Max. speed 13 km/h (8.1 mph)
Ground pressure, empty / loaded (no penetration) 0.17 / 0.39 kg/cm² (2.4 / 5.6 psi)
Gradeability 60 % (31°) uphill and downhill, 40 % (21°) sidehill
Fording depth 1,400 mm (55 in)
Length × width × height 8,228 × 3,077 × 3,395 mm (324 × 121 × 134 in)
Tanks 350 l (92.5 gal) fuel, 38 l (10 gal) DEF, 40 l (10.6 gal) hydraulic

Versions and accessories

The 18T is built to each customer’s requirements. The brochure lists superstructures such as digger derricks, dump bodies, man lifts, aerial, telescoping, articulated and folding cranes, vertical drills, welding tents, containers, platforms and service modules. Equipment and options include:

  • High-performance X-Track rubber tracks or steel tracks.
  • Pintle hook for a gross trailer weight of up to 16,700 kg (36,800 lb).
  • Telemetry COM box and kit for frame height reduction.
  • Cold-weather options (220 V or 110 V): feeder pressure reduction, engine block heater, hydraulic oil heater, heated rear mirrors, heated fuel filter, heated windows and Webasto auxiliary heating.
  • Air-suspended heated seat, amber beacon light and backup alarm.

Telemet support

Telemet’s team works with PowerBully to advise on the right configuration for each operation and to support the PowerBully 18T in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

PowerBully 18T brochure

Brochure

en

Compatible equipment

Related equipment and services

PowerBully 12C tracked carrier chassis, front three-quarter view

Telemet Green

PowerBully

PowerBully 12C

PowerBully 12C tracked carrier: a 13,200 kg payload chassis for cranes, aerial lifts or drill rigs on soft terrain, with a 126 kW PTO for attachments.

View product

View service

PowerBully 9C with a hooklift unloading an equipment container

Telemet Green

PowerBully

PowerBully 9C

PowerBully 9C tracked carrier: the most compact PowerBully chassis, 9,000 kg payload for cranes, hooklifts or drill rigs, with 0.19 kg/cm² ground pressure.

View product

View service

PowerBully Service pickup truck at an off-road job site with utility vehicles

Telemet Green

PowerBully

PowerBully Service

PowerBully Service: local technicians, online spare parts with overnight availability, service schools and telemetry for PowerBully tracked carriers.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket