The Schmidt Cleango 500 is a mid-range compact street sweeper for daily cleaning in inner cities and urban areas, including pedestrian zones, footpaths, cycle paths and industrial areas. High suction power lets it sweep at a fast working speed and pick up large amounts of dirt, and its 5 m³ hopper extends its radius of action.
Applications
Municipal street cleaning on streets, pedestrian zones, footpaths and cycle paths, along gutters and into corners, in areas with a lot of street furniture and on industrial sites. The front brush arm also handles heavy weed work, and in winter it can carry a snow plough or a front broom.
Key features
- Pulled brush system. The disc brushes are trailed in front of the front axle, which, compared with a pushed system, considerably reduces collision damage and brush wear. The sweeping width is 2,200 mm, or 3,550 mm with the optional third brush, for an area performance of up to 64,000 m²/h.
- Control from the cab. The sweeping unit shifts hydraulically 300 mm to the left or right; brush inclination (with the optional independent brush control) and contact pressure on each side are set from the cab for clean sweeping of corners and gutters.
- Efficient suction. The trailed suction shaft runs on rollers at a constant height behind the brushes and forms one unit with them; its flow-optimized layout allows effective sweeping with lower fuel consumption even at low blower speeds. A hydraulic flap lets in coarse debris.
- Fine dust control. The Cleango 500 holds the top PM10 4-star and PM2.5 certification. According to the manufacturer, the optional pressurized circulating water system, which feeds water from the hopper back into the suction shaft, reduces fine dust emissions by up to 70 % and saves fresh water.
- Large hopper. 5 m³, with tipping discharge as standard and an optional high dump for containers, a watertight, hydraulically locked tailgate, a full-size leaf sieve, and aluminum or stainless steel lining or an all-stainless frame.
- Payload and maneuverability. Up to 6,600 kg of payload, with a 68° steering angle and a 1,850 mm wheelbase for a very tight turning circle.
- Economical drive. A 6-cylinder Euro 6c diesel with diesel oxidation catalyst, closed particulate filter, AdBlue and SCR, and a hydrostatic drive with Eco-Drive that can save up to 20 % in diesel; a CNG drive is available as an alternative.
The cab is insulated to 66 dB(A), with a windshield down to the floor, a floor window onto the suction shaft and disc brushes, and a driver’s seat certified by AGR (Campaign for Healthy Backs).
Technical data
| Hopper volume | 5 m³ |
|---|---|
| Sweeping width | 2,200 mm (3,550 mm with third brush) |
| Area performance | Up to 64,000 m²/h (with third brush) |
| Suction fan | 14,000 m³/h max. air flow; approx. 850 mmH₂O vacuum |
| Fresh water | 685 l (option: up to 1,835 l) |
| Engine | FCA R756 diesel, 6 cylinders, 4,455 cm³, Euro 6c, AdBlue + SCR |
| Power and torque | 120 kW (161 hp); 500 Nm |
| Speed | Sweeping 12 km/h (option: 18 km/h); transport 25, 40, 45 or 50 km/h |
| Turning circle (kerb to kerb) | 5,950 mm |
| Length × width × height | 4,450 × 1,810 × 2,707 mm (with beacon; 5,487 mm long with third brush) |
| Empty weight / permitted total weight | 5,500 kg / 12,100 kg (40 km/h) |
Versions and accessories
Two- or three-brush versions. Options include a weed brush, rear-view and suction shaft cameras, a roof boom with high-pressure lance, an additional water tank, a hand suction hose, central lubrication, Auto-Drive joystick operation and winter equipment. The Cleango 500 can connect to the IntelliOPS telematics platform.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Cleango 500 in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




