The Schmidt FLL snow plough is a single-blade plough with spring-loaded flaps, designed for narrow track vehicles, compact municipal vehicles, tractors, off-road vehicles and pickups. It is intended for low to medium amounts of snow in tight or limited areas such as depots, cycle paths, footpaths and the alleyways of old town centres. It comes in five lengths, from 1.4 to 2.4 m, and weighs only about 195 to 260 kg, so it suits light carrier vehicles used in municipal work.
Applications
- Winter service on footpaths, cycle paths and pedestrian zones.
- Car parks, depots and other limited areas where a larger plough cannot manoeuvre.
- Inner-city streets and narrow alleyways in historic centres.
- Low or medium snow depths; according to the manufacturer, it can be used with any type of snow.
Key features
- Flat blade curvature. The flat profile of the blade ejects snow easily, which makes it well suited to clearing in city centres.
- Spring flap override system. Pre-tensioned torsion springs let the flaps on the underside of the blade fold back when they hit a hidden obstacle; the blade stays in the clearing position and is not damaged. Depending on length, the FLL has three, four or six flaps.
- Two cutting edges. The steel edge (S) resists bending and twisting and gives a clean result when intensive clearing is needed; the rubber edge (R) glides over the surface for gentle clearing of paved areas, inner-city roads and car parks.
- Infinitely variable angle. The blade can be angled to the right or left and positioned precisely for each site. Angling is mechanical as standard and hydraulic as an option.
- Quick mounting. The lifting device is easy to operate and offers a large lifting height, depending on the spring travel of the vehicle; the plough can be fitted or removed in a few minutes.
- Castor wheels. They set the plough precisely, support the frame when driving over obstacles and extend the service life of the cutting edge.
- Rubber snow deflector. The flexible shield directs the air stream and the snow dust to the side so the driver keeps a clear view, mainly when clearing wet, heavy snow at low speed; it is not easily damaged.
Technical data
| Parameter | FLL 14 | FLL 16 | FLL 18 | FLL 20 | FLL 24 |
|---|---|---|---|---|---|
| Length at cutting edge | 1,400 mm | 1,600 mm | 1,800 mm | 2,000 mm | 2,400 mm |
| Clearing width at 30° | 1,210 mm | 1,390 mm | 1,570 mm | 1,740 mm | 2,090 mm |
| Plough height | 720 mm | 720 mm | 720 mm | 720 mm | 720 mm |
| Spring-loaded segments | 3 | 4 | 4 | 4 | 6 |
| Approx. weight with steel cutting edges | 195 kg | 210 kg | 220 kg | 235 kg | 260 kg |
Versions and accessories
The FLL is offered in five sizes, from the FLL 14 to the FLL 24. It mounts on vehicles with their own lifting system through suitable adaptors, or on vehicles with their own three-link lifting system using double-acting hydraulic cylinders. The hydraulic system works with the vehicle hydraulics through two control valves. Options include:
- Hydraulic angling system.
- Warning markers and safety devices.
- LED plough lighting.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt FLL in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
