Schmidt Stratos 4.0 – 12.0 m³

Schmidt Stratos 4.0 - 12.0 m³ spreader for trucks and tractors: modular hopper, belt or auger, pre-wet and spreading widths up to 14 m.

The Schmidt Stratos 4.0 – 12.0 m³ spreader is the large Stratos series for winter maintenance with trucks, tractors and other carrier vehicles. Hopper, belt or auger conveyor, pre-wet equipment, distribution system, drive, demount system and control panel are combined to suit each operation, from the mounted Stratos 40 to the Stratos 120 and the trailer versions A40K and A50K. According to the manufacturer, it uses sustainable components made of recycled material.

Applications

  • Winter maintenance of roads and motorways with trucks and tractors.
  • Hilly and mountainous regions, where the central tank intake keeps the pre-wet system working on steep ground.

Key features

  • Mounting and demounting. Two basic variants, one for demount legs, hooklifts and fixed mounting and one for ro-ro (roll on/roll off); both can be demounted with a full hopper and full brine tanks. The latest ro-ro system gives 40 cm more clearance for a trailer or a mobile warning sign.
  • Conveyor belt. A fibre-reinforced V-profile belt on a stainless steel guide plate, with adjustable speed and a feed gate with lump-crushing function, doses all commercial spreading materials precisely, whatever their moisture content.
  • Auger conveyor. A cold-formed Flex auger with two-stage pitch moves material with low breakaway torque and empties the hopper evenly. A dosing disc with closed-loop control ensures even dosing, and a standard cover takes the load off the auger to extend its service life.
  • Pre-wet equipment. Lateral tanks in impact-proof, cold-resistant polyethylene with baffles allow pre-wet ratios from FS 25 to FS 35, with level indicator and a stainless steel filling connection. When brine (FS 30) is switched on, the dry material is reduced and the distribution adjusted automatically.
  • Premium and Premiumplus distribution. A polyethylene chute and optimised outlet angle bring the material to the centre of the spreading disc. In Premiumplus, salt and brine are fully mixed in a rotary mixing chamber, set electronically for symmetrical or asymmetrical patterns over 2–10 m, 3–12 m or 4–14 m. On contact, the whole distribution system folds back to avoid damage.
  • Four drive options. Vehicle hydraulics (with LS systems, lower fuel and oil consumption), a separate wheel drive, the patented Rotopower, which takes power from the rear wheel hub and is described by Schmidt as CO₂-neutral and fuel-saving, or a diesel engine at the front of the spreader.
  • EvolutionLine control. The ES panel has a frost-proof 7-inch colour touchscreen and add-on modules such as voice confirmation, rear camera view, GPS, Route Assistant, ThermoLogic and an IntelliOPS modem; the EP panel can be extended and the EC covers basic needs.

Technical data

Hopper capacity 4–12 m³ (Stratos 40 to 120); 4 and 5 m³ for the A40K and A50K trailer spreaders
Lateral brine tanks 1,850–3,000 l
Pre-wet ratio FS 25 to FS 35
Conveyor system Belt or auger (belt only on Stratos 100, 120, A40K and A50K)
Spreading width 2–10 m, 3–12 m or 4–14 m, depending on the distribution system
Hopper width 2,000 mm (2,150 mm on Stratos 100 and 120)
Mounting length 3,500–5,020 mm
Hopper height 1,490–2,235 mm
Empty weight approx. 1,015 kg (Stratos 40) to 1,700 kg (Stratos 120); 2,415–2,440 kg for the trailer spreaders
Mounting/demount system RoRo, demount legs, hooklift, skip handler or fixed mounting, depending on the version
Drive Vehicle hydraulics, Rotopower, wheel drive or engine drive (vehicle hydraulics only on Stratos 100 and 120)
Control system EC, EP or ES

Versions and accessories

  • Mounted spreaders: Stratos 40, 50, 60, 70, 80, 90, 100 and 120, with hoppers of 4 to 12 m³.
  • Trailer spreaders: Stratos A40K and A50K, with 4 and 5 m³ hoppers, belt conveyor and integrated drive or vehicle hydraulics.

Telemet support

Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Stratos 4.0 – 12.0 m³ in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

Schmidt Stratos 4.0 – 12.0 m³ product booklet

Brochure

en

Compatible equipment

Related equipment and services

Schmidt Stratos spreader on a Unimog with a front snow plough on a snowy mountain road

Telemet Green

Aebi Schmidt

Schmidt Stratos 1.7 – 3.0 m³

Schmidt Stratos 1.7 - 3.0 m³ spreader for 3.5–7.5 t carriers and the Unimog: municipal and national roads, with flat and dual-chamber versions.

View product

View service

Schmidt Syntos

Telemet Green

Aebi Schmidt

Schmidt Syntos

Schmidt Syntos wet salt spreader made of polyethylene, with the brine tank built into the hopper, for pick-ups, small carriers and trailers.

View product

View service

Schmidt Stratos Combi Soliq

Telemet Green

Aebi Schmidt

Schmidt Stratos Combi Soliq

Schmidt Stratos Combi Soliq combination machine: spreads grit, dry and wet salt and sprays brine, from pre-wet 30 to 100 in one unit.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket