The Schmidt Street King 660 is a truck-mounted sweeper for municipal street cleaning that combines strong suction, a 7 m³ hopper and a large water supply for long sweeping runs. It is built on a self-supporting frame, so it can be fitted to any type of truck as long as the load capacity requirements for approval are still met; because it sits on a universal intermediate frame rather than on the truck itself, it can also be set up as a demountable sweeper and the truck can then be used for winter maintenance.
Applications
- Sweeping of streets, roads and public areas, including leaves and large debris.
- Year-round fleets: with the interchangeable system, the same truck can be converted in a few hours from sweeper to spreader with snow plough.
- Low-emission sweeping: the hydrostatic version can be mounted on a CNG-powered truck, which the manufacturer presents as an alternative to diesel that reduces noise and emissions.
Key features
- Sweeping unit. A towed sweeping unit, mounted on the right or the left, with brake-back protection. The roller brush integrated into the suction shaft allows a 15% higher sweeping speed without affecting the result, and a pneumatic coarse dirt cover picks up larger debris. The optional dual version sweeps 3,500 mm in one pass.
- Low wear, no lubrication. Adjustable brush contact pressure and speed keep brush wear low; the sweeping unit rises and the water pump stops automatically when reversing, and there are no lubrication points.
- Suction system. The suction fans sit across the direction of travel at the front of the hopper, which shortens the body and optimises air flow for up to 18,000 m³/h.
- Water system. 1,600 l water tanks at the rear lower the centre of gravity, and auxiliary tanks between cab and body add up to 1,000 l. The optional three-stage water volume control and individually switchable jets reduce water use, and the optional pressurised water recirculation system extends working time by up to 30% and improves dust binding.
- Hopper. Stainless steel floor pan, rubberised baffle plates, a 60° tipping angle for complete emptying and a folding leaf screen. A patented radar sensor shows the actual fill level as a percentage during sweeping.
- Operator comfort. A 7-inch colour touch screen, a door control panel with joystick for one-hand operation, on-board diagnostics and an optional monitor for up to three cameras.
- Air quality. According to the PDF, the Street King 660 reaches the best PM10/PM2.5 certification level, with four stars each.
Technical data
| Hopper volume | 7 m³, tipping angle 60° |
|---|---|
| Sweeping width | 2,350 mm (dual version: 3,500 mm) |
| Disc brush diameter | 550 / 650 / 750 mm |
| Roller brush | 400 mm diameter, 1,300 mm long |
| Max. air flow (free flow) | 18,000 m³/h |
| Water volume | 1,600 l; fresh water pump 8 bar / 48 l/min |
| Auxiliary engine | Deutz TD 2.9 L04, diesel, 4 cylinders, 2,900 cm³ |
| Engine power and torque | 55.4 kW (74 hp) at 2,600 rpm; 260 Nm |
| Emission standard | EuroMot V (DOC + DPF) or EuroMot IIIA |
| Sweeping speed | 20 km/h |
| Empty weight (approx.) | 4,250 kg (dual version: 4,650 kg) |
| Truck chassis required | 15–18 t gross weight, wheelbase approx. 3,200–3,500 mm |
Versions and accessories
Two drive concepts are available: motor driven, with an auxiliary engine, or hydrostatic drive, which needs no superstructure engine and gives infinitely variable travel speed between 0 and 25 km/h in sweeping mode. Options include:
- Wander hose on the rear door or roof-mounted, for gullies and large debris.
- Spray bar and high-pressure water system, and a rear suction unit for the full vehicle width.
- Exhaust air management, for example under trees, and leaf screen cleaning.
- Surrounding LED lighting and the dual sweeping version.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Street King 660 in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




