The Schmidt Tarron MS Airport snow plough is a series of multi-blade special ploughs, based on the Tarron range, for fast and efficient snow clearance on airport runways, taxiways and aprons. Cutting edges from 4,800 to 8,000 mm, five to eight ploughshares and an automatic override system let it pass over ground obstacles such as concrete elevations and ground lights without damage.
Applications
- Clearing runways, taxiways and aprons, including clearing in formation: the blade shape is designed for wide ejection even at low feed rates.
- Aprons and other sensitive areas where unwanted snow deposits must be avoided, with the A-version ejection barrier.
- Large amounts of snow and all types of snow.
- Front plough on Schmidt jet sweepers, such as the TJS, which is offered with Tarron MS airport ploughs.
Key features
- Multi-blade system. Five to eight ploughshares, each with a special Vulkollan clearing rail, adapt to the traffic area. Pre-tensioned blade segments allow aggressive use; each blade is held by two reinforced springs, and the outer segments by three, for better stability when overriding obstacles.
- 45° angle of attack. The aggressive 45° blade gives high clearing quality and wide ejection even at low feed rates.
- Low-blade option. In the N versions with reduced blade height, the plough is 220 mm lower on the left, centre and right.
- Maintenance-free override system. The automatic system allows safe, smooth driving over concrete elevations or ground lights, and shock absorber strips absorb the impact and reduce noise.
- Airport cutting edges. PUR slush cutting edges, often used at airports, clear efficiently without damaging the surface or the ground lights; according to the manufacturer, they offer very high slide resistance and low noise. Rubber (R) and GuKo (GK 5) cutting edges are available only for the MS 48.2.
- Lifting and angling. A parallel lifting device lifts, lowers and swivels the plough, provides large ground clearance in transport and allows tension-free swivelling. Its design keeps the centre of gravity close to the front axle for better weight distribution, and two hydraulic cylinders with high actuating forces handle the side changeover.
- Fine finish blade. The optional hydraulic fine-clearing bar removes remaining snow, increasing safety and reducing the use of de-icing agents.
- Support and visibility. Infinitely height-adjustable castor wheels, with optional splash guards, support the frame over obstacles and extend cutting edge life. Two snow deflectors are available: polyurethane with joint covers that keep slush out from between the blades, and adjustable cloth for powder snow and high speeds.
Technical data
| Parameter | MS 48.2 | MS 56.2 | MS 64.2 | MS 72.2 | MS 80.2K |
|---|---|---|---|---|---|
| Number of blades | 5 | 6 | 7 | 8 | 8 |
| Total width (mm) | 4,804 | 5,606 | 6,406 | 7,207 | 8,007 |
| Clearing width at 32° (mm) | 4,110 | 4,752 | 5,431 | 6,110 | 6,789 |
| Plough height, centre, with elastomer (mm) | 1,453 | 1,453 | 1,453 | 1,453 | 1,434 |
| Plough height, right and left, with elastomer (mm) | 1,546 | 1,546 | 1,546 | 1,546 | 1,546 |
| Plough height, centre, N version (mm) | 1,169 | 1,169 | 1,169 | 1,169 | 1,169 |
| Approx. weight with PUR cutting edges and wheels (kg) | 1,315 | 1,460 | 1,590 | 1,735 | 1,925 |
Versions and accessories
Each size comes in several versions, which can be combined (for example MS 72.2N-W or MS 80.2N-K):
- N: reduced blade height.
- A, snow ejection barrier: left and right barriers, operable while driving, turn the plough into a U-shaped plough that collects snow (MS 48.2N-A, 56.2N-A and 64.2N-A).
- K, foldable outer segments: reduce the passing width of the plough to save parking space.
- W, quick release system: saves time when attaching the plough to a truck.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Tarron MS Airport in service, with spare parts, technical service and training. Ask a specialist about availability for your project.


