The Schmidt Wasa 300⁺ towed sweeper cleans streets in small towns and communities, as well as industrial and port areas. It picks up dirt mechanically and has no suction fan, which avoids large amounts of fine dust; according to the manufacturer, it meets the top four-star level of the PM10/PM2.5 certification. A 3 m³ hopper and 1,100 l of water give a surface capacity of up to 48,000 m², and the hydraulic system runs from the PTO of the towing vehicle.
Applications
- Street cleaning in small towns and communities.
- Industrial sites and port areas, including very coarse dirt.
- Residential and urban areas, where its low noise level allows it to work, according to the manufacturer.
Key features
- Mechanical sweeping. Two disc brushes in front of the axle move debris to the centre, and a rear roller brush feeds it to the hopper through a broad elevator. All brushes have wear-free direct drive by hydraulic motor, and their lifting, lowering and ground pressure are set from the control panel.
- High-throughput elevator. Installed at 60°, with stepless transport speed control and a top-mounted hydraulic motor for smooth running.
- Water system. Two non-corrosive plastic tanks, left and right, hold 1,100 l in total and swing out for cleaning and maintenance; a hydraulic pump supplies the 12 spray nozzles with up to 36 l/min.
- Large steel hopper. 3 m³, with a conical shape for quick, safe emptying, hydraulic tipping, a discharge height of 1,750 mm and a hydraulically extendable support that keeps the unit from tipping over.
- Operation from the cab. All functions are run from a control panel with a graphic display in the towing vehicle; sensors monitor the oil temperature and warn if it is too high or too low.
- Manoeuvrable drawbar. A slim drawbar allows a large steering angle.
- Quiet hydraulics. The manufacturer describes the hydraulic system as environmentally friendly, quiet even at full power and suitable for organic oil, with all relevant components easy to reach for adjustments and repairs.
Technical data
| Hopper volume / tilt angle | 3 m³ / 123° |
|---|---|
| Sweeping width | 2,400 mm |
| Disc brush diameter | 1,100 mm |
| Roller brush diameter / length | 800 mm / 1,150 mm |
| Elevator conveying performance | 9 m³/min |
| Total water volume | 1,100 l |
| Fresh water pump | 10 bar / 36 l/min |
| Hydraulic system | 150 l tank, approx. 88 l/min, max. 160 bar |
| Drive | PTO shaft, 540 rpm |
| Empty weight of the basic unit, approx. | 4,000 kg |
| Permissible axle load / drawbar support load | 6,000 kg / 2,000 kg |
| Recommended towing vehicle | 50 kW (70 hp), 540 rpm PTO, 600 W electrical power, compressed-air trailer brakes |
Versions and accessories
- Bottom or top coupling, with various drawbar eyes.
- Hydraulic swivel drawbar as an option.
- Brush material in steel or mixfill.
- 12 V or 24 V working voltage.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Wasa 300⁺ in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




