The SMI Standard Polecat snow gun is a fan snowmaker with a mid-range throw, aimed at terrain that needs consistent, good-quality snow without the maximum distance of the larger models. It belongs to SMI’s Polecat line, uses a simple nozzle design with a central nucleator, and can run in manual, automatic or semi-automatic mode, either as a standalone machine or connected to a complete snowmaking network.
Applications
Snowmaking on ski slopes and areas where a throw of up to about 46 m (150 ft) is enough, at a lower cost than the big-throw machines. Because it is offered on towers and on carriages, it can be fixed along a trail or moved to where snow is needed, and its oversized nozzles and filter suit sites with difficult water quality.
Key features
- Configurable operation. Manual, automatic or semi-automatic models, with the option to upgrade existing machines, so the equipment can be matched to each operation and budget.
- Automation. Automatic models have an onboard weather station, continuous monitoring of air and water pressure and automated flow control through a valve manifold. SMI’s SmartSnow software adds remote control and fully automatic modes.
- Simple manual version. Manual models regulate water with three heated, self-draining three-way valves, and their components are organized for easier servicing and faster troubleshooting.
- Handles variable water quality. Oversized nozzles and an integrated stainless steel filter with a washable screen keep clogging to a minimum.
- Air supply options. It works with an onboard piston or vane compressor or with hill air from the resort’s compressed air network.
- Serviceability. An open layout and readily available parts make maintenance straightforward and help reduce downtime.
Technical data
| Fan | 10 HP (7.5 kW) or 15 HP (11 kW), SMI patented aluminum propeller |
|---|---|
| Fan speed | 1,760 rpm at 480 V/60 Hz; 1,450 rpm at 400 V/50 Hz |
| Power supply | Three-phase; 480 V/60 Hz, 575 V/60 Hz or 400 V/50 Hz |
| Compressor | 5.5 HP (4.8 kW) Atlas Copco, 10.1 l/s at 7 bar (21.4 cfm at 100 psi); 5 HP (3.7 kW) Hydrovane, 10.4 l/s at 7 bar (22 cfm); 10 HP (7.5 kW) Hydrovane, 20.5 l/s at 7 bar (43.3 cfm); or hill air |
| Water pressure | 7–35 bar (100–500 psi) |
| Nozzles | 18 in manual configuration (6 always on, plus 3 valves with 4 nozzles each); 24 in automatic configuration |
| Nucleator | Central nozzle with six jets |
| Throw | Up to about 46 m (150 ft) |
| Rotation | 360° horizontal; elevation from −10° to 60° |
| Heating | 225 W; optional nozzle heater of 500 W (400 V/50 Hz) or 1,300 W (480 V/60 Hz); 900 W additional with hill air |
| Filtration | Stainless steel filter with washable 30 mesh screen |
| Electrical cord | Tower 12 m (40 ft); carriage 30 m (100 ft) |
Versions and accessories
The fan comes in 10 HP and 15 HP versions, with electrical options for other countries. Mounting and oscillation options listed by SMI include:
- Towers of 3.2 m (10.5 ft) or 4.7 m (15.5 ft), 8-inch and 10-inch towers, Denali Tower, Swing Arm Tower and Access Tower.
- Three-wheel painted A-frame carriage or three-wheel galvanized steel carriage with snowcat lifting brackets; Delta Chassis and Omni Tower to Chassis.
- Oscillator with a 70° arc, optional on tower and galvanized carriage; the product page also offers 359° oscillation.
Telemet support
Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI Standard Polecat in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




