The SMI Super Puma snow gun is the big-throw, fully automated fan snowmaker of SMI’s Puma series. It combines a 25 HP fan, 27 heated peripheral nucleators and fine water flow steps, and SMI describes it as its preferred snowmaker for marginal conditions. With a throw of about 69 m (225 ft), it is the longest-reaching machine in the series.
Applications
Snowmaking on wide, open slopes where maximum terrain coverage is needed, and at resorts that must make snow near the temperature limit to open earlier in the season, offer more trails or recover quickly after bad weather. It can be controlled machine by machine or from a central system, on towers or carriages.
Key features
- Edge nucleation. The 27 heated nucleators sit at the edge of the airflow, where air velocity is highest, for efficient snow formation. 75 interior nozzles add water volume and improve snow quality as crystals move outward through the plume, and heating prevents freeze-ups in extreme cold.
- Fully automatic operation. An onboard weather station monitors conditions continuously, and the machine adjusts water volume, air pressure and nucleation as the weather shifts.
- Fine water flow steps. Additional flow steps give finer adjustment as temperatures fluctuate and, with the automation, capture more snowmaking temperature windows.
- Enclosed design. Compressor, valves and hoses are protected by insulated covers that prevent freezing.
- Control and monitoring. Machines can be run from a central computer or with SmartSnow7 on several devices, and from a touch screen HMI on the unit. A strobe light signals a change of state or a fault, and an LED floodlight improves visibility.
- Transport and service. A low center of gravity and adjustable lifting brackets for all snowcat blade designs make it easy to move with a groomer blade; the unit is user-serviceable, with readily available parts.
Technical data
| Fan | 25 HP (19 kW), SMI custom aluminum propeller |
|---|---|
| Power supply | Three-phase; 480 V/60 Hz, 575 V/60 Hz or 400 V/50 Hz |
| Compressor | 5 or 10 HP (4 or 7.5 kW) rotary vane, or hill air |
| Throw | About 69 m (225 ft) |
| Nucleation | 27 heated peripheral nucleators; 75 interior nozzles |
| Water flow (Puma series) | 40–500 l/min (10–130 gpm) |
| Water pressure (Puma series) | 10–63 bar (150–1,000 psi) |
| Valves | Five heated, self-draining three-way valves in an automated valve manifold |
| Heating | 500 to 2,500 W |
| Oscillation | Standard, up to 359°, with programmable arcs |
| Weather station | Temperature from −30 °C to 70 °C (−22 °F to 158 °F); relative humidity 0–100 % |
| Communications | Copper, CAT 5 Ethernet, fiber optic or radio |
Versions and accessories
The Standard Puma is the series’ mid-range version, with a 20 HP fan. SMI is rolling out new 7-inch HMI screens on all machines from spring 2026. Mounting options for the Super Puma include:
- Tower of 3.2 m (10.5 ft) and 10-inch tower, Denali Tower, Access Tower and Swing Arm Tower, with an 8 m (25 ft) swing arm.
- Three-wheel galvanized carriage and Omni Tower to Chassis.
Telemet support
Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI Super Puma in service, with spare parts, technical service and training. Ask a specialist about availability for your project.



