Snow & ice management

Keep and recover access when snow or ice builds up.

Equipment and services for this need

Brand

Schmidt VKS

Telemet Green

Aebi Schmidt

Schmidt VKS

Schmidt VKS mounted sweeper for medium and heavy carrier vehicles: 2,200 to 2,600 mm roller brushes for coarse dirt, light snow and airport aprons.

View product

View service

Aebi CC 111 single-axle machine with a mulcher on a mountain pasture

Telemet Green

Aebi Schmidt

Aebi CC 111

Aebi CC 111 motor mower: the most compact Combicut single-axle machine, with a 10 hp engine, stepless hydrostatic drive and active steering for steep slopes.

View product

View service

Aebi CC 140e with a portal mower on a steep rocky slope

Telemet Green

Aebi Schmidt

Aebi CC 140e

Aebi CC 140e electric single-axle machine: four 2.0 kWh swappable batteries, up to 8 kW boost and no exhaust fumes for slopes, towns and indoor work.

View product

View service

Aebi Combicut CC 150 / CC 160 series with spiked double wheels on a steep meadow (CC 160 shown)

Telemet Green

Aebi Schmidt

Aebi CC 150

Aebi CC 150 motor mower: Combicut single-axle machine with an 18 hp two-cylinder engine and up to 2,500 mm cutter width for slopes and year-round work.

View product

View service

Aebi CC 160

Telemet Green

Aebi Schmidt

Aebi CC 160

Aebi CC 160 motor mower: Combicut single-axle machine with a 23 hp EFI engine and up to 3,100 mm cutter width for steep slopes and heavy winter service.

View product

View service

Aebi MT 770 with raised three-way tipper and tilted cab, side view

Telemet Green

Aebi Schmidt

Aebi MT

Aebi MT multipurpose transporter: 1.70 m wide narrow-track carrier with a 156 hp Euro 6e diesel, up to 89 km/h and up to 7,500 kg total weight.

View product

View service

Arctic SHJ TR side plough throwing snow beside a tractor with a front plough on a snowy road

Telemet Green

Aebi Schmidt

Arctic SHJ TR

Arctic SHJ TR tractor side plough: 42° wing on the rear linkage, up to 4.5 m with a front plough, and snowbank cutting at a negative angle.

View product

View service

ELP Harness Series II carrying a front snow plough on a truck with a spreader body

Telemet Green

Aebi Schmidt

ELP Harness Series II

ELP Harness Series II plough harness: fully detachable, pinned without bolts, so one operator removes plough, harness and side wing in minutes.

View product

View service

ELP Harness Series III with a front snow plough mounted on a red dump truck

Telemet Green

Aebi Schmidt

ELP Harness Series III

ELP Harness Series III plough harness for urban work: single lift point, fewer parts and tool-free pinned mounting for contractors and municipalities.

View product

View service

ELP IBS dump body raised on a tandem-axle truck

Telemet Green

Aebi Schmidt

ELP IBS

ELP IBS interchangeable body system: one truck chassis changes between spreader, dump body, tanker or platform in under 10 minutes, without special tools.

View product

View service

ELP Series 632 reversible snow plough mounted on a red truck

Telemet Green

Aebi Schmidt

ELP Series 632

ELP Series 632 reversible snow plough for trucks: full trip steel moldboard, 0–30° angling to either side and a 3,048 mm clearing width at 30°.

View product

View service

ELP Series 672 one-way snow plough on a truck, front view

Telemet Green

Aebi Schmidt

ELP Series 672

ELP Series 672 one-way snow plough for trucks: full trip steel moldboard set at 35° to the right, with a 3,302 mm clearing width and chain lift.

View product

View service

ELP Sidewing side plough on the right side of a red truck with an ELP Series 672 front plough

Telemet Green

Aebi Schmidt

ELP Sidewing

ELP Sidewing side wing plough: clears beyond the right lane and high snowbanks, with a 42° fixed blade, override protection and five lengths.

View product

View service

MB de-icing sprayer truck with spray booms extended on an airport apron

Telemet Green

Aebi Schmidt

MB De-Icing Sprayers

MB de-icing sprayer for airport runway clearing: chassis-mounted or slip-in de-icers, folding stainless boom and a 4,732 l tank on the MB5 MTE.

View product

View service

MB 4600 pivot-lift front-mount broom on an airport truck

Telemet Green

Aebi Schmidt

MB Front Mount Brooms

MB front mount airport brooms for runway clearing: the 4600 Pivot Lift and Vertical Lift brooms and the MB3 chassis, interchangeable with plows.

View product

View service

MB H2000 snow blower on a wheel loader throwing snow beside a road

Telemet Green

Aebi Schmidt

MB H2000

MB H2000 snow blower for wheel loaders: clears up to approx. 1,360 t/h, with a 239 kW Tier 4 Final engine and fuel for 8–10 hours of work.

View product

View service

MB MB2 with front plow and tow broom clearing an airport apron

Telemet Green

Aebi Schmidt

MB MB2

MB MB2 jet sweeper for airports: multitasking chassis for plows, tow brooms, scrapers, spreaders and de-icing, with a 370 kW Tier 4 Final engine.

View product

View service

MB MB3 jet sweeper with its heavy-duty front broom

Telemet Green

Aebi Schmidt

MB MB3

MB MB3 jet sweeper for airport snow removal: front broom and air blowers in one pass, clearing width up to 6.7 m and a 280 kW Tier 4 Final engine.

View product

View service

MB MB4 snow blower clearing a runway, with a plow truck behind

Telemet Green

Aebi Schmidt

MB MB4

MB MB4 snow blower for airports: up to approx. 6,800 t/h, 2.59 m cutting width and a cast of up to 46 m; the chassis also takes plows and brooms.

View product

View service

MB MB5 plowing and sweeping a runway as an aircraft lands

Telemet Green

Aebi Schmidt

MB MB5

MB MB5 jet sweeper for airports: front plow, mid-mounted broom and air blowers in a single pass, with two 370 kW Tier 4 Final diesel engines.

View product

View service

MB MB5C with front plow and mid-mounted broom on an airport apron

Telemet Green

Aebi Schmidt

MB MB5C

MB MB5C jet sweeper for airports with cradling broom: plow, brush and blower in one pass, two 370 kW engines and parking in a 3.7 m wide space.

View product

View service

MB MB6P 6x6 truck with a front plow and dump spreader body

Telemet Green

Aebi Schmidt

MB MB6P

MB MB6P road maintenance truck for airports and highways: 4x4 or 6x6 heavy-duty chassis, 336 kW Cummins engine, plows, spreaders and tow brooms.

View product

View service

MB MB7BT bi-directional tractor with a snow blower at one end and a plow at the other

Telemet Green

Aebi Schmidt

MB MB7BT

MB MB7BT multipurpose tractor for airports: bi-directional, with PTO and 3-point hitch at both ends for two attachments, and a 150 kW EU Stage V engine.

View product

View service

MB North Star snow blower with its front clearing head

Telemet Green

Aebi Schmidt

MB North Star

MB North Star snow blower for airports: single engine, all-wheel drive, up to approx. 3,450 t/h and a compact design for truck loading.

View product

View service

MB P5000 snow plow mounted on an MB2 chassis

Telemet Green

Aebi Schmidt

MB P5000

MB P5000 snow plow for runway clearing: fully reversible, 1.27 m moldboard set at 65°, 75° or 85°, and fits DIN, Hustings, J-hook and pin hitches.

View product

View service

MB P8200 rollover plow mounted on an MB chassis at an airfield

Telemet Green

Aebi Schmidt

MB P8200

MB P8200 snow plow for runways: rollover design 227 kg lighter than all-steel plows, tapered moldboard and a 3.05 m effective plowed path.

View product

View service

MB P5000 snow plow mounted on an MB2 (in the photo, the P5000)

Telemet Green

Aebi Schmidt

MB Plows

MB airport snow plows for runway clearing: reversible P5000, P5500-C cupping ramp plow with a 9.45 m path, P8200 rollover plow and underbody scrapers.

View product

View service

Meyer Base Line BL-800 insert hopper spreader in a pickup truck on a snowy street

Telemet Green

Aebi Schmidt

Meyer Base Line Insert Hopper Spreader

Meyer Base Line insert hopper spreader for pickup trucks: 1.15 or 1.53 m³ steel hopper, drag chain conveyor, gas or electric drive and up to 9.1 m spread.

View product

View service

Meyer Base Line 400 tailgate spreader on a flatbed pickup truck in a snowy forest

Telemet Green

Aebi Schmidt

Meyer Base Line Tailgate Spreader

Meyer Base Line tailgate spreader for walkways and driveways: 181 kg (400 lb) poly hopper on a receiver hitch and spread up to 7.6 m (25 ft).

View product

View service

Meyer Blaster tailgate spreader spreading salt from the back of a truck on a snowy lot

Telemet Green

Aebi Schmidt

Meyer Blaster

Meyer Blaster tailgate spreader: Quick-Hitch for one-person mounting, 0.18 or 0.36 m³ poly hopper and direct-drive motor that grinds frozen chunks.

View product

View service

That is everything published here.

Frequently asked questions

Short answers to the questions we hear most. For your specific case, write to us using the form below.

What does Telemet’s snow and ice management solution cover?

It covers the equipment and support needed to keep access open, or to recover it, when snow or ice builds up on roads, public areas and work sites. Telemet represents the manufacturers, helps you choose the right equipment, supplies it from the manufacturer and supports it once it is in operation. The published catalog includes an Aebi Schmidt snow plough, a Kodiak snow blower and a support service for snow equipment.

Which snow removal equipment can Telemet supply for roads and access routes?

The current catalog includes Schmidt snow ploughs for municipal and highway vehicles and Kodiak snow blowers, mounted on their own truck or on wheel loaders. Kodiak builds snow blowers and runway sweepers for airports, railways and roads. Which unit suits your routes depends on the snow volume, the width to clear and the vehicles available, so a Telemet specialist can help you compare them.

What information helps choose snow and ice equipment for my operation?

Start with the volume of snow you usually face, the time window you have to clear it and the vehicle that will carry the equipment. It also helps to describe the type of operation, the climate at the site, the level of service you must maintain and whether you deal with wet snow, slush or ice. With those details, a Telemet specialist can recommend a configuration; the right answer depends on each case.

Can Telemet support snow removal equipment that is already in service?

Yes. Snow equipment support is Telemet's service for snow equipment already in operation, and requests go through the Support page. Include the model and, if you have it, the serial number, where the machine works and in what conditions, what you need (parts, service, training or documents) and how urgent it is. Telemet's staff is trained in each line of equipment and works closely with the manufacturers to resolve each request.

Discuss your requirements

Tell us about the site, the conditions and what you need to solve. A specialist will review it with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket