Ports and terminals dust control

DustBoss misting rings, mobile cannons and tower units control the dust released when bulk cargo is loaded and unloaded at ports and terminals.

DustBoss cannon on a barge suppressing dust while a material handler unloads rock at a waterfront terminal

As a major link in the transportation chain, ports handle massive amounts of dust-generating material, from coal to grain and everything in between. Loading and unloading cargo disturbs the material constantly and lets fugitive particles escape into the air. This dust can contain harmful minerals such as silica, which makes it a hazard for employees and for the community around the terminal. An effective dust control strategy helps protect workers, keep good relations with neighbors and meet air quality regulations.

DustBoss equipment uses atomized mist technology to trap airborne particles and bring them to the ground. BossTek works with each facility to find the system and setup that match its operation.

How DustBoss controls dust at the terminal

  • Conveyor and chute discharge. The DB-R Ring is installed at conveyor and chute discharge points and surrounds the falling material with mist. It is commonly used when loading barges or trucks.
  • Mobile cannons. The DB-60, BossTek’s flagship unit, is a mobile misting cannon that is easily moved around the terminal to control dust wherever it is needed.
  • Elevated mounting. Cannons can be mounted on towers or existing structures to give an elevated angle of attack over stockpiles and loading areas.
  • Wind. The DustBoss Surge center nozzle produces a streamlined flow designed for the windy conditions common at waterfront locations.

Port operations

The photos BossTek publishes for this application show DustBoss equipment in several port operations:

  • Loading coal and other bulk material into barges through a chute.
  • Bulk cargo handling alongside ships, with cranes, hoppers and conveyors.
  • Rock and bulk material handled with material handlers on barges and docks.
  • Stockpiles of bulk material, such as biomass, under conveyors and loading spouts.

Telemet support

Telemet’s team works with BossTek to recommend the right machine and configuration for each site and to support it in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

Equipment used

DustBoss DB-Ring misting the discharge of a conveyor

Telemet Green

BossTek

DustBoss DB-Ring

DustBoss DB-Ring misting ring: stainless steel ring that wraps conveyor and chute discharge in mist to control dust at the source. Nine sizes.

View product

View service

DustBoss DB-60 on its carriage controlling dust at a demolition site

Telemet Green

BossTek

DustBoss DB-60

DustBoss DB-60 dust control cannon: 60 m throw, 30,000 cfm fan and a wheeled carriage; up to 11,612 m² of coverage with 359° oscillation.

View product

View service

DustBoss DB-100 on a tower suppressing dust on a petcoke stockpile at a port

Telemet Green

BossTek

DustBoss Tower Systems

DustBoss tower systems raise a misting cannon on a galvanized steel tower up to 6.1 m high to extend the throw and form a mist barrier over dust sources.

View product

View service

DustBoss DB-60 Surge dust control cannon

Telemet Green

BossTek

DustBoss DB-60 Surge

DustBoss DB-60 Surge dust control cannon: center nozzle jet that cuts through wind, 60 m throw, 260° oscillation and three flow stages.

View product

View service

DustBoss DB-100 on its skid spraying mist over a stockpile

Telemet Green

BossTek

DustBoss DB-100

DustBoss DB-100 dust control cannon for the largest sites: 100 m throw, 359° oscillation as standard and up to 31,000 m² of coverage.

View product

View service

Discuss this application

Tell us about the site and the work you need to do. A specialist will recommend the right equipment and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket