The DustBoss® DB-M Mini is a compact dust suppression mister for localized dust control in smaller spaces. A misting head mounted on a boom releases atomized mist right where the dust is generated, and the unit needs no electricity to operate. Mist intensity is matched to each application by choosing among different nozzle configurations.
Applications
BossTek recommends the DB-M Mini for job sites where dust has to be controlled close to its source:
- Crushers and hoppers.
- Indoor applications.
- Many other points that call for localized dust suppression in a small space.
Key features
- No electricity required. The mister works without an electrical supply, so it can be installed at points where no power is available.
- Boom to fit the point. The standard boom is 0.6 m (2 ft) long, and custom lengths from 0.3 to 4.57 m (1 to 15 ft) place the head where the dust is released.
- Configurable nozzles. Different nozzle configurations adjust the intensity of the mist to the application.
- Short, concentrated throw. A throw of about 3 m (10 ft) keeps the mist close to the source, as localized suppression requires.
- Water quality guidance. BossTek provides recommendations for using non-potable water.
Technical data
| Type | Boom-mounted atomized mist head |
|---|---|
| Throw | Approx. 3 m (10 ft) |
| Standard boom length | 0.6 m (2 ft) |
| Custom boom lengths | 0.3–4.57 m (1–15 ft) |
| Water flow | 2.5–22.7 l/min (0.65–5.99 gpm) |
| Power supply | Not required |
Telemet support
Telemet’s team works with DustBoss to advise on the right configuration for each operation and to support the DustBoss DB-M Mini in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
