The DustBoss® DB-10 is the smallest unit in the DustBoss family of fan-driven dust suppression equipment. It sets up with nothing more than a garden hose and 120 V power, which makes it a practical choice for small spaces, and it is light enough to be moved around the site by hand. BossTek designed it for indoor and outdoor demolition sites where airborne dust is generated; its throw reaches 10 m (30 ft).
Applications
The DB-10 is meant for demolition work in confined areas, and BossTek’s launch article for the model focuses on indoor dust control for a safer workplace. It suits:
- Interior demolition, where dust stays trapped in the building.
- Small outdoor demolition jobs, such as houses.
- Small spaces where only a standard 120 V supply and a garden hose are available.
Key features
- Minimal setup. A 5/8 in garden hose connection and single-phase 120 V power are all the unit needs, so it is ready to work as soon as it arrives.
- Portable by hand. The unit can be moved around the site quickly and easily as the work advances.
- Adjustable aim. The throw angle adjusts from 0° to 50°; the rated 10 m (30 ft) throw is measured at a 20° angle.
- Low water use. The unit uses 0.76 to 1.32 l/min (0.20 to 0.35 gpm), and BossTek lists water savings among its benefits.
- Flow adjustment. Interchangeable nozzles vary the water flow to suit the job.
- Protection on site. According to the manufacturer, it helps protect both workers and the surrounding community from airborne dust.
Technical data
| Throw | 10 m (30 ft) at a 20° throw angle |
|---|---|
| Throw angle | 0° to 50°, adjustable |
| Water flow | 0.76–1.32 l/min (0.20–0.35 gpm) |
| Fan motor | 0.75 HP (0.56 kW), electric |
| Power supply | Single phase, 120 V |
| Water connection | 5/8 in garden hose |
Versions and accessories
- Interchangeable nozzles for flow variation.
Telemet support
Telemet’s team works with DustBoss to advise on the right configuration for each operation and to support the DustBoss DB-10 in service, with spare parts, technical service and training. Ask a specialist about availability for your project.


