PistenBully 400 W

PistenBully 400 W snow groomer with 4 t ActiveWinch 4.0+ and AutoWinch for steep slopes, 320 kW EU Stage V engine and compact dimensions.

The PistenBully 400 W snow groomer is the winch version of the PistenBully 400, a mid-size machine that the manufacturer presents as a multi-talent for slopes, trails, indoor ski resorts and parks. It keeps the compact dimensions and maneuverability of the earlier PB 400 and adds a 320 kW engine that meets EU Stage V, the operating concept of the PistenBully 100 and 600, new assistance systems and the ActiveWinch 4.0+ with AutoWinch for pushing and climbing on steep slopes. According to PistenBully, its torque and power-to-weight ratio give it strong pushing and climbing performance.

Applications

  • Grooming steep slopes where winch support is needed for climbing and for safe work on the slope.
  • Pushing and distributing snow with the AllWayBlade, including snow gun transport with the integrated snowgun mount.
  • Slopes, cross-country trails (with the optional NordicFlexTiller), indoor ski resorts and snow parks.

Key features

  • ActiveWinch 4.0+ with AutoWinch. Stepless, automatic pulling force of up to 40 kN (4 t). The winch co-steers the vehicle for stable tracking under lateral loads, AutoWinch matches rope speed to driving speed and compensates slip, and the capstan drive keeps the pulling force constant regardless of the rope left on the storage drum.
  • AllWayBlade. A 4.4 m blade, with or without snowgun holder, built for light weight, stability and precise preliminary grooming; the snow screen, the wing mountings and the hydraulic cylinders were reinforced.
  • AlpinFlexTiller SmartCut. A 5.5 m tiller with SmartCut tiller teeth, dimmable lighting and camera, mounted on a quick-change system with parallel kinematics and reduced hose routing, tried and tested on the PistenBully 600.
  • Chassis. New main frame, stronger tensioning axles, larger drive pumps and the 6-belt CombiPlus track for pushing force and climbing ability. The rear implement carrier has vibration compensation and lateral damping as standard.
  • Operation. A 4-axis joystick for four simultaneous blade movements, iTerminal touchscreen and four stored operator profiles. AutoTracer supports steering in curves and countersteers automatically on side slopes.
  • Cleaner engine. The Cummins L9 with diesel particulate filter meets EU Stage V and Tier 4f and, according to the manufacturer, has more power and torque than its predecessor with lower fuel consumption. PistenBully states that renewable HVO fuel cuts CO₂ emissions by up to 90 %.
  • SnowSat ready. The machine is prepared for SnowSat snow depth measurement, which helps the operator locate areas with little snow and snow reserves.

Technical data

Engine Cummins L9, 6 cylinders, 8.9 l
Power (ECE) 320 kW (429 hp)
Max. torque 1,846 Nm at 1,500 rpm
Emission standard EU Stage V, EPA Tier 4f and China IV
Fuel tank 240 l (120 l additional tank as an option)
DEF (AdBlue®) tank 36 l (9.5 gal)
Fuel consumption From 19.5 l/h (5 gal/h)
Speed 0–19 km/h, stepless; 0–17 km/h in winch operation
Climbing ability Up to 100 %
Minimum operating weight 12,510 kg (with CombiPlus tracks, AllWayBlade and tiller)
Winch pulling force 40 kN (4 t), stepless and automatic
Winch rope 11 mm diameter, 1,050 m (1,000 m usable)

Versions and accessories

The PistenBully 400 is the version without winch. Options named by the manufacturer for the 400 W include:

  • NordicFlexTiller, tracking plates with or without track tiller, and passenger cabins.
  • ProMount swap system and NoDeck version.
  • Tracks: 6-belt CombiPlus, X-Track rubber tracks (1,150 and 1,420 mm) or steel tracks.
  • LED light package, automatic climate control, auxiliary heating, trailer hitch, drive control stick and SnowSat fleet management with LiDAR snow depth measurement.

Telemet support

Telemet’s team works with PistenBully to advise on the right configuration for each operation and to support the PistenBully 400 W in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

PistenBully 400 W datasheet

Datasheet

en

PistenBully 400 W brochure

Brochure

en

Compatible equipment

Related equipment and services

PistenBully 400 in its winch version pushing snow with the front blade on a slope

Telemet Green

PistenBully

PistenBully 400

PistenBully 400 snow groomer for slopes, trails and parks: 320 kW EU Stage V engine, 6-belt CombiPlus tracks and up to 100 % climbing ability.

View product

View service

PistenBully 400 ParkPro W with winch boom and raised ProBlade on a groomed slope

Telemet Green

PistenBully

PistenBully 400 ParkPro W

PistenBully 400 ParkPro W snow groomer for building snow parks: ProBlade, ProFlexTiller SmartCut and a 4 t active winch for steep terrain.

View product

View service

PistenBully 600 Polar W climbing a steep slope on its winch rope

Telemet Green

PistenBully

PistenBully 600 Polar W

PistenBully 600 Polar W snow groomer for steep slopes: ActiveWinch 4.6+ with AutoWinch, 4.6 t pulling force and 382 kW EU Stage V engine.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket