The PistenBully front snowblower is a hydraulically driven front attachment that turns a PistenBully snow groomer into a snow-moving tool for ski areas. Instead of pushing snow with the blade, the machine picks it up with its augers and throws it through an adjustable chute, so snow can be taken from the edges of the slope back to worn areas or spread evenly. PistenBully offers two designs: one for the PistenBully 100 and a two-stage blower for the larger models (the data sheet lists the PistenBully 200, 300, 400 and 600), with adjustable ejection distances of up to 30 m and 40 m respectively.
Applications
The manufacturer lists these uses on and around the slopes:
- Moving snow from the edge of the ski slopes to worn-out areas and transporting it back from the edge to the main runs.
- Redistributing snow and spreading it uniformly.
- Cutting and filling moguls.
- Laying out new trails and clearing old ones.
Key features
- Two designs matched to the vehicle. The PistenBully 100 version combines a spiral cutter auger with two impellers and two chutes; the version for larger groomers is a two-stage blower with double spiral tillers and a single ejector chute. According to the manufacturer, the generous size and cross-section of the components make the attachment highly efficient.
- Adjustable discharge. On the PistenBully 100 version, the chutes turn hydraulically through 250° and their angle can be adjusted; hydraulic ejector flaps set the ejection timing and distance.
- Full vehicle width. The PistenBully 100 version can be shifted sideways to work across the entire width of the vehicle.
- Operation from the cab. Two double-acting control circuits are operated with the front attachment controls in the driver’s cab.
- Performance reserves. The manufacturer describes the two-stage design as exceptionally robust; drive and gears are rated for high engine speeds, which allows long ejection distances.
- Faster travel and better vision. On the two-stage version, the narrow construction considerably increases performance, especially forward speed, and having only one ejector chute and fewer moving parts improves the view to the front.
Technical data
| Parameter | PistenBully 100 | PistenBully 200/300/400/600 |
|---|---|---|
| Auger diameter | 550 mm (21.7 in) | 750 mm (29.5 in) |
| Impeller diameter | 520 mm (20.5 in) | 750 mm (29.5 in) |
| Clearing width | 2,700 mm (106.3 in) | 4,300 mm (169.3 in) |
| Clearing height | 720 mm (28.3 in) | – |
| Total width | – | 2,700 mm (106.3 in) |
| Overall height | Approx. 1,600 mm (63 in) | – |
| Excavated area | – | 800 mm (31.5 in) to each side |
| Ejection distance (adjustable) | Up to 30 m (33 yd) | Up to 40 m (44 yd) |
| Ejector chutes | 2 | 1 |
| Weight | Approx. 640 kg (1,410 lb) | Approx. 970 kg (2,140 lb) |
Versions and accessories
The PistenBully 100 version is the design with two chutes, which can be repositioned sideways on the small groomer. On the PistenBully 100, hydraulic front attachments such as the snowblower are connected through the front high-pressure connection kit of the technology package. The two-stage version is intended for the larger PistenBully models; the manufacturer’s page lists the PistenBully 600 Polar, 600 Polar W, 600 Select and 300 Polar Antarctic as matching products.
Telemet support
Telemet’s team works with PistenBully to advise on the right configuration for each operation and to support the PistenBully front snowblower in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
