The Schmidt Galeox NT spreader is a series of de-icing spreaders for trucks with two or three axles, designed for spreading in urban and suburban areas. Hopper capacities range from 4 to 9 m³. Its simple, robust construction, modern manufacturing processes and proven components from the Schmidt Stratos series are, according to the manufacturer, the basis of its reliability and of a first-class price-performance ratio.
Applications
- Winter service on urban and suburban roads with dry spreading materials.
- Pre-wetted salt spreading, with optional lateral brine tanks, for more operational flexibility.
- Fleets that need to remove the spreader from the truck: RoRo system, demount legs or tipper system.
Key features
- Integrated structure. The base frame and tail section are integrated into the hopper for high stability. The steel hopper is blasted and powder coated for corrosion protection, and the aggregate compartment is watertight and corrosion-protected.
- Accurate dosing. The belt conveyor keeps a constant feed rate, so dosing stays accurate whatever the moisture of the spreading material. Adjustable belt speed and a feed gate with integrated lump crushing allow precise dosage of all common spreading materials.
- Low-friction belt. The V-shaped, endlessly profiled conveyor belt glides with full surface contact over a stainless steel guide plate, and the drive roller runs on low-maintenance bearings.
- Controlled pre-wetting. The brine tanks, about 30% of the hopper volume, have a level indicator, ventilation, a pump with dry-run protection and a rear Storz C connection. When brine is switched on (FS 30), dry material is reduced automatically and the distribution settings are adapted; sensors compare actual and target values.
- Stainless steel distribution. The whole distribution system is stainless steel and folds with gas pressure springs. A height-adjustable open chute, an asymmetric spreading pattern set by swivelling the lower end of the chute, a mixing system and a 490 mm spreading disc support economical use of material.
- Choice of drive. Vehicle hydraulics; Rotopower, which takes the power from the rear wheel hub; or a diesel engine integrated into the rear of the spreader, with no additional build-up length.
- Road-speed related control. Digital EC or EP control units with click-turn knobs and illuminated, waterproof push buttons; the simple menu adapts quickly to conditions.
Technical data
| Parameter | NT 40 | NT 50 | NT 60 | NT 70 | NT 80 | NT 90 |
|---|---|---|---|---|---|---|
| Hopper capacity | 4 m³ | 5 m³ | 6 m³ | 7 m³ | 8 m³ | 9 m³ |
| Lateral brine tanks | 1,850 l | 1,850 l | 1,850 l | 2,400 l | 2,400 l | 2,400 l |
| Hopper length | 3,000 / 3,600 mm | 3,000 / 3,600 mm | 3,600 mm | 4,200 mm | 4,200 mm | 4,200 mm |
| Mounting length | 3,500 / 4,100 mm | 3,500 / 4,100 mm | 4,100 mm | 4,700 mm | 4,700 mm | 4,700 mm |
| Hopper width | 2,000 mm | 2,000 mm | 2,000 mm | 2,000 mm | 2,000 mm | 2,000 mm |
| Empty weight, approx. | 1,000 kg | 1,030 kg | 1,060 kg | 1,200 kg | 1,250 kg | 1,285 kg |
All models: belt conveyor, 490 mm spreading disc, spreading width 2–8/10 m depending on material and conditions, EC or EP control.
Versions and accessories
Six sizes, from the Galeox NT 40 to the NT 90. Each spreader takes one of two mounting systems: a base frame for demount legs, tipper system or fixed mounting, or the RoRo (roll on – roll off) system; both can be demounted with an empty hopper and full brine tanks. Options:
- LED rotating beacon.
- Red and white marking, or winter service marking.
- Splash guard, 2,000 or 2,200 mm.
- IntelliOPS.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Galeox NT in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




