The Snomax HW300 injection system is designed for small-scale snowmaking operations. It delivers a constant, reliable flow of Snomax solution into the snowmaking water using a Hydra-Cell P200 metering pump, a three-piston diaphragm pump that keeps the flow uniform over a wide span of operating pressures, and a submersible pump that circulates the solution in the cylindrical tank so the product stays well mixed. A mix pump timer panel starts the mixing pump automatically, and a Vacon variable frequency drive (VFD) sets the injection rate with easy-to-use controls on the unit or remotely through a 4–20 mA signal. A manifold on the pump outlet regulates pressure and includes pressure relief valves and a pressure gauge; an optional basket strainer removes particles that could clog the pump check valves.
Technical summary
| Approx. weight | 136 kg (300 lb) |
|---|---|
| Tank (cylindrical) | 1,626 mm high × 559 mm diameter (64 × 22 in) |
| Overall dimensions (H × L × W) | 2,134 × 1,219 × 711 mm (84 × 48 × 28 in) |
| Metering pump | Hydra-Cell P200, max. pressure 69 bar (1,000 psi) |
| Max. flow, P200 | 2,536 ml/min at 60 Hz and 5,093 ml/min at 120 Hz, at 6.9 bar (100 psi) |
| Injection pump motor | 1 HP (0.75 kW), three-phase, 1,750 rpm, inverter duty |
| Mixing pump | Little Giant submersible pump, 102 l/min at 3 m head (27 gpm at 10 ft) |
| Electrical supply | 60 Hz, 15 A dedicated circuit with a standard 110 V outlet; 220 V on request |
