Snomax P200 Pump Skid

Snomax P200 pump skid: compact unit that replaces the injection pump and controls of a Snomax system, with P200 metering pump and remote VFD control.

The Snomax P200 pump skid is a compact pump unit that replaces the injection pump and controls of an existing Snomax injection system; on its website, Snomax also describes it as a bypass for existing injection pumps. It brings together a basket strainer, a Hydra-Cell P200 three-piston diaphragm metering pump, 7.6 m (25 ft) of high-pressure line with an injection tip, low-pressure inlet piping with fittings, and a Vacon variable frequency drive that controls pump output with on-board controls or remotely through a 4–20 mA flow signal. A manifold block on the pump outlet regulates operating pressure with a pressure gauge, bleed valve and pressure relief valve. With its small footprint on a skid, the unit is easy to move, install and maintain, and automated ball valves are available as an option to operate the bleed and injection lines remotely.

Technical summary

Approx. weight 91 kg (200 lb)
Overall dimensions (H × L × W) 1,219 × 686 × 762 mm (48 × 27 × 30 in)
Metering pump Hydra-Cell P200 (standard) or P400 (optional), max. pressure 69 bar (1,000 psi)
Max. flow P200: 2,536 ml/min at 60 Hz and 5,093 ml/min at 120 Hz; P400: 7,647 ml/min at 60 Hz and 15,331 ml/min at 120 Hz (at 6.9 bar (100 psi))
Motor 1 HP (0.75 kW), three-phase, 1,750 rpm, inverter duty
Electrical supply 60 Hz, 15 A dedicated circuit with a standard 110 V outlet; 220 V on request
Versions With 110 V drive; with 110 V drive and automated ball valves

Video

More information

Snomax P200 pump skid datasheet

Datasheet

en

Compatible equipment

Related equipment and services

Snomax HW300 injection system with its tank, metering pump and controls on a stand

Telemet Green

Snomax

Snomax HW300 Injection System

Snomax HW300 injection system for small-scale snowmaking: P200 metering pump, submersible mixing pump and VFD for a constant flow of Snomax solution.

View product

View service

Snomax P800 injection system with blue tank, pump and control box

Telemet Green

Snomax

Snomax P800 Injection System

Snomax P800 injection system for larger ski areas: full automation as standard, flowmeter-ready control panel and centrifugal mixing pump.

View product

View service

Snomax spare parts: injection hose, injection tip, ball valve and Hydra-Cell pump rebuild kit

Telemet Green

Snomax

Snomax Spare Parts

Snomax spare parts: stock of the main parts for Snomax injection systems, from pump rebuild kits and valves to drives, motors and calibration tubes.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket