The Snomax SW1200 injection system is meant for very large ski areas: with a capacity of 1,200 liters, Snomax describes it as the largest fully automated injection system available. The tank and frame are built for simple installation and maintenance in any pump house. An external Price centrifugal pump prepares the initial solution and keeps it well mixed during operation, and the control panel combines manual controls with fully automatic operation when connected to a flowmeter, for hours of unattended work under varying flow conditions. A Vacon variable frequency drive sets the injection rate with on-board controls or remotely through a 4–20 mA flow signal. A Y-strainer between the valves and a basket strainer remove particles before they reach the pump check valves, and automated ball valves allow remote operation of the bleed and injection lines. Snomax lists versions with the standard P200 pump, with the optional P400 for more capacity, and a Touch version with the P200.
Technical summary
| Capacity | 1,200 l |
|---|---|
| Approx. weight | 454 kg (1,000 lb) |
| Overall dimensions (H × L × W) | 2,184 × 2,946 × 864 mm (86 × 116 × 34 in) |
| Metering pump | Hydra-Cell P200 (standard) or P400 (optional), max. pressure 69 bar (1,000 psi) |
| Max. flow | P200: 2,536 ml/min at 60 Hz and 5,093 ml/min at 120 Hz; P400: 7,647 ml/min at 60 Hz and 15,331 ml/min at 120 Hz (at 6.9 bar (100 psi)) |
| Injection pump motor | 1 HP (0.75 kW), three-phase, 1,750 rpm |
| Mixing pump | Price centrifugal pump, 1 HP (0.75 kW), 379 l/min at 3 m head (100 gpm at 10 ft) |
| Electrical supply | 110 V, 30 A dedicated circuit with an L5-30R twist-lock outlet; 220 V on request |
