Dust created during construction and demolition is not just a nuisance: it is a hazard for workers and for the surrounding environment, and awareness of its effects on respiratory health keeps growing. For a long time the usual tool was a water hose, used to spray and saturate materials so the dust would not become airborne. The industry has learned that this method has serious limitations.
DustBoss units take a different approach. They use atomized misting technology to capture and contain dust at the source, before it migrates off site and reaches workers or the surrounding community.
How DustBoss captures demolition dust
A hose produces large droplets. Their force creates a slipstream effect that pushes fine particles away from the spray, so the dust is moved around instead of contained. To bring dust down, droplets must be small enough to bond with the particles. DustBoss cannons create a fine mist of water droplets that bond with dust in the air and carry it to the ground.
- No one standing in the demolition zone. A hose needs a worker on standby for the whole operation, spraying by hand near heavy machinery. A DustBoss cannon is set up at a distance and can be started and aimed by remote control.
- Less runoff. Hoses release large volumes of water that pool on the ground, leave muddy and slippery conditions for workers and machinery, and can carry contamination toward local water sources. Atomized mist puts the water in the air, where the dust is.
DustBoss on the job site
The photos BossTek publishes for this application show DustBoss units next to demolition excavators on industrial structures, office buildings in city centers and sites beside occupied buildings, often with two cannons covering the work from different sides. The range includes compact units for indoor and outdoor demolition, the self-powered DustBoss Atom, which only needs a water source, cannons on trailers with their own diesel genset (Fusion) and the Surge, whose center nozzle jet cuts through the wind.
Telemet support
Telemet’s team works with BossTek to recommend the right machine and configuration for each site and to support it in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
