The Schmidt FS 110 T snow blower is a high-performance attachment for rugged implement carriers and tractors, designed above all for high-capacity snow clearing on airfields. It uses the high-performance clearing head of the Schmidt Supra 5002, and its drive is designed for up to 400 kW from the power take-off of the carrier vehicle. With a clearing width of 3,000 mm and an ejection distance of up to about 40 m, it is built for the toughest clearing conditions.
Applications
- High-capacity snow clearing on airfields and at airports, the use for which the clearing head was developed.
- Heavy clearing work with large volumes of snow, mounted on tractors or rugged implement carriers with 250 to 400 kW of driving power.
- Very heavy snow, with the optional snow blades on the clearing head.
- Throwing snow to the side with the short target chute, or loading it with the loading chute.
Key features
- Supra 5002 clearing head. An extremely robust head, identical to that of the Supra 5002 and developed for high-performance use at airports; according to the manufacturer, it gives the FS 110 T an outstanding clearing capacity.
- Two-stage system. Open cutting spirals on the milling drums feed a blower wheel; the alignment of drum and blower wheel gives a high clearing capacity, and the blower wheel housing swivels hydraulically to the right or left.
- Open, cantilevered drums. The open, slow-running milling drums cope with unexpected objects, and because they have no side bearings, the carrier steers precisely in snow without additional outriggers.
- Hardox wear-resistant steel. The supporting shell, blower wheel, blower wheel housing and milling drums are made of Hardox steel; the cutting edges are replaceable and side deflectors protect against collisions.
- Directed ejection. A hydraulic slewing ring carries a short target chute or a loading chute, both with hydraulically adjustable flaps, and a slow-running hydraulic motor turns the chute.
- Wider pass. An optional hydraulically operated feed flap widens the clearing width by about 700 mm.
- Direct mechanical drive. A Cardan shaft with shear pin coupling takes power from the PTO shaft straight to the drum drive; the drums are driven and centrally mounted via an angular gear and protected by shear bolts or an optional mechanical overload protection. The unit is operated from the carrier vehicle’s control panel.
Technical data
| Clearing width | 3,000 mm |
|---|---|
| Ejection distance | Up to approx. 40 m |
| Driving power | 250–400 kW |
| PTO speed | 540 / 1,000 rpm |
| Cutter drive | Mechanical |
| Max. clearing speed | 40 km/h |
| Approx. weight | 3,200 kg (depending on equipment and size) |
| Mounting | Rear three-point linkage, category III or IV |
Versions and accessories
The clearing head drive can be set up for front or rear mounting with two different planetary gears; the snow blower is mounted on a rear three-point lifting system with category III or IV linkages. Optional equipment named by the manufacturer:
- Adjustable trailing wheels or skids to set the ground clearance.
- Snow blades on the clearing head for very heavy snow.
- Hydraulic feed flap (about 700 mm more clearing width).
- Mechanical overload protection for the milling drums, instead of shear bolts.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt FS 110 T in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
