The Schmidt Supra 5002 is the high-capacity model of the Supra self-propelled snow cutter blowers, designed to move large volumes of snow on airports and on all kinds of road surfaces. Compared with the Supra 4002, it has an 8-cylinder, 440 kW engine, and the higher power reaches the clearing head through a mechanical drive with a two-stage gearbox. For airport work it can be fitted with hydraulically movable front flaps that widen the clearing path and adapt it to the width of the snow bank.
Applications
- Snow removal on airport surfaces, where the front flaps widen the clearing path and all-wheel drive helps in narrow areas near aircraft.
- Heavy snow removal on all road surfaces, including hard-packed and layered snow.
- Loading snow onto trucks, for example snow contaminated with de-icing agents.
Key features
- Mechanical head drive. The two-stage gearbox transmits the extra power of the 8-cylinder engine to the cutter drum and blower wheel; the ejection distance is set in two stages, from 6 to 40 m.
- Front flaps for airports. Hydraulically movable flaps increase the clearing width and can be matched to the snow bank, for more efficient removal on large surfaces.
- Chute and ejection. The ejection housing swivels hydraulically to either side, and a 225° slewing ring carries a short target chute or a loading chute with hydraulic flap; the chute folds down for transport and an optional height adjustment serves trucks with high tail lifts.
- Articulated steering and all-wheel drive. The rear carriage stays in the clearing track of the front carriage, so the feed force acts in the working direction even in tight corners.
- Fuel and noise. In Eco mode, a lower engine speed saves up to 20% fuel with practically unchanged clearing performance and less noise, according to the manufacturer; the 480 l tank allows up to 8 hours of work.
- Operator workplace. Two-seat cab with 75 dB(A) noise level, heated windows, hydraulically raisable cab, adjustable TFT console, joystick armrest for one-hand operation and GPS-Guide for autonomous clearing of a route mapped in summer.
- Durability. Rigid axles without swivel joints, leaf springs, Elaskon corrosion protection and Hardox wear parts.
Technical data
| Clearing width | 2,400 / 2,600 / 2,800 mm |
|---|---|
| Ejection distance | Up to approx. 40 m, in two stages from 6 m |
| Cutter drive | 2-stage gearbox |
| Travel drive | Hydrostatic |
| Engine | Deutz diesel, 8 cylinders, 15,930 cm³ |
| Power | 440 kW (590 hp) at 1,800 rpm |
| Max. torque | 2,700 Nm at 1,200 rpm |
| Emission standard | EuroMot V (EU), EuroMot IIIA outside the EU, Tier 4 Final for the USA and Canada |
| Fuel tank | 480 l |
| Max. driving speed | 40 / 50 km/h |
| Steering | Articulated, 35° steering angle |
| Weight with clearing head (approx.) / gross vehicle weight | 11,200 kg / 12,000 kg |
Versions and accessories
The Supra 5002 is offered with clearing widths of 2,400, 2,600 or 2,800 mm. Options include the hydraulic front flaps, adjustable castor wheels, a caterpillar track drive that can be swapped quickly for standard tyres, chute height adjustment, air conditioning and a rear view camera. Like the rest of the series, it can be connected to the Aebi Schmidt IntelliOPS platform. The Supra 4002 is the alternative with a 6-cylinder engine and a hydrostatic, reversible head drive.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Supra 5002 in service, with spare parts, technical service and training. Ask a specialist about availability for your project.




