Schmidt Supra 4002

Schmidt Supra 4002 snow cutter blower for roads and airports: 330 kW, reversible hydrostatic head drive and 0–40 m stepless ejection distance.

The Schmidt Supra 4002 is a self-propelled snow cutter blower for removing large quantities of snow from roads and airport surfaces. Its clearing head combines a cutter drum with a downstream blower wheel in a monobloc design, and in the 4002 the head is driven hydrostatically by a hydraulic motor mounted directly on it. That makes the head drive reversible and lets the operator vary the ejection distance continuously from 0 to 40 m, to the left or right, or load the snow straight onto trucks.

Applications

  • Clearing all types of snow on roads and other paved surfaces.
  • Snow removal on airports, including tight areas close to aircraft, thanks to all-wheel drive and articulated steering.
  • Loading snow onto trucks, including snow contaminated with de-icing agents that must be taken away.

Key features

  • Clearing head. FS-type front with a large drum drive and a blower wheel whose ejection housing swivels hydraulically to the right or left. Adjustable skids set the distance between the ground and the wear bar; adjustable castor wheels are optional.
  • Adjustable chute. A hydraulic slewing ring with a 225° turning range carries either a short target chute or a loading chute with a hydraulic ejection flap. An optional height adjustment serves trucks with high tail lifts, and the whole chute folds down hydraulically for transport.
  • Articulated steering. The rear carriage follows the front carriage exactly, so the feed force always acts in the working direction of the clearing head, even in tight corners and hard-packed snow.
  • Economical drive. Fully reversible hydrostatic travel drive with a variable displacement pump and motor. In Eco mode, a lower engine speed saves up to 20% fuel at the same driving speed and with practically unchanged clearing performance, according to the manufacturer; the 480 l tank allows up to 8 hours of work.
  • Cab and controls. Two-seat cab insulated against noise and vibration (75 dB(A)), heated front and side windows, a cab that can be raised hydraulically, a windscreen with a negative angle against snow build-up, a movable TFT colour console and a fold-up armrest with joystick for one-hand control.
  • GPS-Guide. After mapping the route in summer, the machine can clear it in winter fully autonomously, without damaging track boundaries and without extra track marking.
  • Robust construction. Maintenance-free rigid axles with higher load capacity, a torsionally stiff frame, leaf springs, wide tyres for low surface pressure, Elaskon corrosion protection and wear-resistant Hardox parts in high-stress areas.

Technical data

Clearing width 2,400 / 2,600 / 2,800 mm
Ejection distance Up to approx. 40 m, infinitely variable
Cutter drive Hydrostatic
Travel drive Hydrostatic
Engine Deutz diesel, 6 cylinders, 11,950 cm³
Power 330 kW (443 hp) at 2,000 rpm
Max. torque 2,100 Nm at 1,300 rpm
Emission standard EuroMot V (EU), EuroMot IIIA outside the EU, Tier 4 Final for the USA and Canada
Fuel tank 480 l
Max. driving speed 40 / 50 km/h
Steering Articulated, 35° steering angle
Weight with clearing head (approx.) / gross vehicle weight 10,780 kg / 12,000 kg

Versions and accessories

The Supra 4002 comes with a clearing width of 2,400, 2,600 or 2,800 mm. Options include adjustable castor wheels, a quick-change caterpillar track drive for stratified snow layers, chute height adjustment, air conditioning, a rear view camera and full Elaskon sealing. The machine can be connected to the Aebi Schmidt IntelliOPS platform for live activity maps and reports. For higher clearing capacity, the Supra 5002 uses an 8-cylinder engine and a mechanical head drive.

Telemet support

Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Supra 4002 in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

Schmidt Supra 4002/5002 product booklet

Brochure

en

Compatible equipment

Related equipment and services

Schmidt Supra snow blower clearing deep snow in the mountains

Telemet Green

Aebi Schmidt

Schmidt Supra 5002

Schmidt Supra 5002 snow cutter blower for airports and roads: 440 kW 8-cylinder engine, two-stage head drive and optional front flaps.

View product

View service

Schmidt FS 110 T snow blower rear-mounted on a tractor on an alpine road

Telemet Green

Aebi Schmidt

Schmidt FS 110 T

Schmidt FS 110 T snow blower for tractors and implement carriers: Supra 5002 clearing head, 3,000 mm width and up to 40 m ejection for airfields.

View product

View service

Schmidt FS HP

Telemet Green

Aebi Schmidt

Schmidt FS HP

Schmidt FS HP snow cutter-blower for 75–300 hp carriers: three models, 1,600–2,650 mm widths and up to 1,800 t/h for roads and traffic areas.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket