The Schmidt Stratos D 4.0 – 6.0 m³ spreader is a dual-chamber spreader for de-icing in difficult locations such as mountainous regions. It mounts on a Unimog or a truck, and its hopper is split into two separate chambers in a 1/3 to 2/3 ratio, so two different spreading materials can be applied at the same time, in varying mixing ratios or separately.
Applications
- De-icing roads in mountainous regions and other difficult locations.
- Routes that call for two spreading materials, mixed or one after the other, without stopping to reload.
- Unimog and truck fleets that need a low spreader with a clear view to the rear.
Key features
- Dual-chamber hopper. Two separate chambers, split 1/3 and 2/3, discharge a variety of spreading materials, together or separately.
- Twin auger conveyor. Gives a particularly flat hopper that uses the full width of the vehicle. The augers work separately and can be controlled directly; their two-stage incline ensures uniform emptying, and a high-torque, direct-drive hydraulic motor gives a stable, safe start-up.
- Low, vehicle-wide design. The low centre of gravity improves manoeuvrability, and the low body gives the driver a good rear view, which Schmidt highlights as a plus for road safety.
- Flexible mounting. Suitable for demount legs, Ro-Ro demount systems, tipper demount systems, roll-off tipper systems or fixed bodies.
- Pre-wet equipment. Lateral brine tanks with level indicator, a brine pump with run-dry protection and a rear Storz C connection for filling and emptying. When brine (FS 30) is switched on, the dry material is reduced automatically and the distribution settings are adapted; integrated sensors compare actual and target values.
- Premium distribution. Premium spreading discs with a 5-zone mixing system discharge a homogeneous mixture as a bundled jet that compensates for wind. The swivelling discs set a symmetrical or asymmetrical pattern, manually or electronically, from 2–10 m or 3–12 m wide.
- Drive and control. Usually driven by the carrier vehicle’s hydraulics, with a diesel engine as an option. The EvolutionLine ES control panel, with click-turn knobs and illuminated push buttons, works with ThermoLogic and Route Assistant, and the spreader can be connected to IntelliOPS to show machine activity live on a map and produce reports.
Technical data
| Version | Stratos D 40 | Stratos D 50 | Stratos D 60 |
|---|---|---|---|
| Hopper capacity | 4 m³ | 5 m³ | 6 m³ |
| Lateral brine tanks | 2,200 l | 2,200 l | 2,200 l |
| Spreading width (490 / 660 mm disc) | 2–10 m / 3–12 m | 2–10 m / 3–12 m | 2–10 m / 3–12 m |
| Hopper length | 3,600 mm | 3,600 mm | 3,600 mm |
| Mounting length | 3,800 mm | 3,800 mm | 3,800 mm |
| Hopper width | 2,000 mm | 2,000 mm | 2,000 mm |
| Frame width | 2,060 mm | 2,060 mm | 2,060 mm |
| Hopper height | 1,250 mm | 1,390 mm | 1,540 mm |
| Empty weight approx. | 1,223 kg | 1,264 kg | 1,311 kg |
| Mounting/demount system | RoRo, demount legs, hooklift or fixed | RoRo, demount legs, hooklift or fixed | RoRo, demount legs, hooklift or fixed |
| Drive | Vehicle hydraulics or engine | Vehicle hydraulics or engine | Vehicle hydraulics or engine |
| Control system | ES | ES | ES |
Versions and accessories
Three hopper sizes are available: Stratos D 40, D 50 and D 60. Options include the 490 or 660 mm Premium spreading discs, the diesel engine drive, ThermoLogic, Route Assistant and the IntelliOPS telematics platform.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Stratos D 4.0 – 6.0 m³ in service, with spare parts, technical service and training. Ask a specialist about availability for your project.


