The Schmidt Stratos F 4.0 – 4.4 m³ spreader is the large model of the flat Stratos F series, built for de-icing in difficult or remote locations such as mountain regions and designed with the Unimog in mind as its carrier. Two augers feed the spreading material, whether sand, grit, dry salt or pre-wetted salt, and the low, wide hopper keeps the vehicle stable and the rear view clear on steep roads.
Applications
- Winter road maintenance on mountain passes and remote roads with steep gradients.
- Spreading of sand, grit, dry salt or pre-wetted salt with brine from the lateral tanks.
- Mounting on the Unimog U500, U527 and U530 with a dedicated ball joint system.
Key features
- Low centre of gravity. The flat, wide hopper avoids large swaying movements on steep slopes and gives the driver an unobstructed view to the rear.
- Twin auger conveyor. Two augers make the flat hopper possible and use the full width of the vehicle; a two-stage incline empties the hopper evenly, and the auger length is optimised so the spreader adapts easily to different carrier vehicles. A high-torque, direct-drive hydraulic motor provides a stable start-up.
- Pre-wet equipment. Lateral brine tanks with a combined 1,760 l, a liquid level indicator and a brine pump with run-dry protection; a rear Storz C connection is used for filling and emptying. When brine is switched on (FS 30), the system automatically reduces the dry material and adjusts the distribution settings to the new mix, with integrated sensors comparing actual and target values.
- Premium spreading discs. A five-zone mixing system discharges a homogeneous mix as a bundled jet that reduces the effect of wind. Swivel technology sets a symmetrical or asymmetrical spreading pattern, manually or electronically from the control panel, while keeping the size of the spread area.
- Two spreading width ranges. 2–10 m with the 490 mm disc or 3–12 m with the 660 mm disc.
- Protected drive. The spreader runs on the vehicle hydraulics; the hydraulic block sits in the power pack compartment, protected from severe weather.
- Control and data. One of three EvolutionLine panels (EC, EP or ES), with click-turn knobs and illuminated buttons. With ThermoLogic and Route Assistant it saves scarce resources, according to the manufacturer, and it can be connected to the IntelliOPS telematics platform for live maps and reports.
Technical data
| Parameter | Stratos F 40 | Stratos F 44 |
|---|---|---|
| Hopper capacity | 4 m³ | 4.4 m³ |
| Lateral brine tanks | 1,760 l | 1,760 l |
| Conveyor system | Dual auger | Dual auger |
| Spreading width, 490 mm disc | 2–10 m | 2–10 m |
| Spreading width, 660 mm disc | 3–12 m | 3–12 m |
| Hopper length | 2,700 mm | 2,700 mm |
| Hopper width | 2,245 mm | 2,245 mm |
| Frame width | 2,260 mm | 2,260 mm |
| Empty weight (approx.) | 1,009 kg | 1,009 kg |
| Drive | Vehicle hydraulics | Vehicle hydraulics |
| Control system | EC / EP / ES | EC / EP / ES |
Versions and accessories
- Two sizes: Stratos F 40 (4 m³) and Stratos F 44 (4.4 m³).
- Mounting with the ball joint system on the Unimog U500/527/530; hydraulically operated demount legs or demount legs with crank drive as options.
- Premium spreading disc of 490 mm or 660 mm, and EC, EP or ES control panel.
- Integration with ThermoLogic, Route Assistant and IntelliOPS.
Telemet support
Telemet’s team works with Schmidt to advise on the right configuration for each operation and to support the Schmidt Stratos F 4.0 – 4.4 m³ in service, with spare parts, technical service and training. Ask a specialist about availability for your project.



