SMI 120F Evaporator

SMI 120F floating evaporator for small ponds: tilting head from 0 to 90° to control drift, foam-filled pontoons and a low-clog manifold.

The SMI® 120F is a floating mechanical evaporator for small ponds, built for sites where controlling the drift of wet and dry particulates is a priority. It reduces the volume of stored water by spraying it into the air as fine droplets: a stainless steel submersible pump feeds the spray manifold and a high-speed fan disperses the water over the pond. The head can be tilted from 0 to 90 degrees to lower the plume and shorten the drift distance which, according to the manufacturer, reduces shutdowns caused by high winds. The SMI 120F floating evaporator is designed to be simple to use and easy to maintain, with its critical components made of stainless steel.

Applications

  • Evaporation of excess water and wastewater stored in small ponds.
  • Operations that must keep wet and dry particulate drift under control.
  • Water carrying suspended particles, since the spray manifold passes particles up to 4.7 mm (3/16 in).

Key features

  • Indexable head. Fan inclination adjusts in increments from 0 to 90 degrees to lower the plume height and reduce drift distance.
  • Floating platform. A galvanized steel frame with stainless steel fasteners rests on three UV-stabilized polyethylene pontoons filled with closed-cell polyurethane foam, which keep the unit afloat even if the outer shell is accidentally punctured.
  • Low buildup. A minimal top surface area limits residue and scale buildup, so there is less cleaning and maintenance.
  • Minimal clogging. Large holes in the stainless steel spray manifold pass particles up to 4.7 mm (3/16 in), reducing the need for prefiltering and filter cleaning and avoiding clogged nozzles.
  • Easy maintenance. The motor is lubricated for life, so the bearings need no weekly lubrication. The pump has a removable static inlet filter, a sleeve with a viewing port to check for scale and obstructions and a holder for easy inspection.
  • Electrical protection. A dual water shield covers the junction box, and the optional vibration switch, in its own enclosure, shuts down the fan before scale or ice buildup on the propeller causes premature motor failure.
  • High performance. High-speed fan rotation creates a droplet distribution suited to evaporation. The manufacturer reports annual evaporation rates of up to 70 %, with typical averages between 25 % and 60 %, depending on ambient temperature, relative humidity, water chemistry, wind, solar radiation and site topography.

Technical data

Type Floating mechanical evaporator
Fan motor 3.7 kW (5 hp), premium efficiency
Fan speed 3,600 rpm at 480 or 575 V, 3-phase, 60 Hz; 2,900 rpm at 380–415 V, 50 Hz
Pump 0.37 kW (1/2 hp), 304 stainless steel submersible pump
Pump voltage options 460 V / 60 Hz, 380–415 V / 50 Hz or 575 V / 60 Hz
Head inclination 0–90°
Floats 3 UV-stabilized pontoons filled with closed-cell PU foam
Maximum particle size 4.7 mm (3/16 in)
Control panel NEMA 4X, with manual, standalone or premium automated controls

Versions and accessories

On manual units, a ball valve regulates flow to the spray manifold as weather conditions change; on automated units, a pump VFD does it. The power cord is submersible-rated and its length is set to the customer’s requirements. Options:

  • Corrosion package: upgrades the galvanized mount to all-stainless steel construction for acidic or highly alkaline water.
  • Standalone Automation: local machine control and operator interface; the pump VFD follows a temperature and humidity algorithm, and the unit starts and stops according to wind speed and direction.
  • Premium Automation: adds remote control, a camera to monitor the equipment and SmartH2O software on a desktop PC, with reports, trends and alarms.
  • Vibration sensor that shuts down the motor if deposits or scale unbalance the fan.

Telemet support

Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI 120F in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

SMI 120F Evaporator datasheet

Datasheet

en

Compatible equipment

Related equipment and services

SMI 420F floating evaporators working on a lake inside a quarry

Telemet Green

SMI Evaporative Solutions

SMI 420F Evaporator

SMI 420F floating evaporator for ponds with little space: low plume for less drift, 25 hp fan and particles up to 4.7 mm without prefiltering.

View product

View service

SMI SmartH2O software main screen with evaporator status, weather data and live camera view

Telemet Green

SMI Evaporative Solutions

SMI SmartH2O Software

SMI SmartH2O software automates evaporators and pumps by wind, rain, humidity and temperature to control drift and aim for 100 % evaporation.

View product

View service

SMI pump suspended below a float, shown out of the water

Telemet Green

SMI Evaporative Solutions

SMI Pumps

SMI pumps for evaporation systems: water supply in three sizes for 1 to 7 evaporators, stainless steel impellers and fittings, efficient intake systems.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket