SMI Evaporative Solutions

Evaporators to reduce water volumes in ponds, reservoirs and industrial processes, especially at mine sites.

SMI Evaporative Solutions

SMI Evaporative Solutions brings forced evaporation equipment in several flow rates, based on the same atomizing technology as the snowmaking line.

The selection depends on the volume to evaporate, the site’s environmental conditions, the water quality and the area available for the installation.

Products

Equipment

SMI 120F evaporators spraying water over an industrial pond

Telemet Green

SMI Evaporative Solutions

SMI 120F Evaporator

SMI 120F floating evaporator for small ponds: tilting head from 0 to 90° to control drift, foam-filled pontoons and a low-clog manifold.

View product

View service

SMI 420B evaporator spraying from its boom over a lined pond

Telemet Green

SMI Evaporative Solutions

SMI 420B Evaporator

SMI 420B evaporator, a land-based unit on an adjustable boom for ponds of all sizes; passes particles up to 4.7 mm and works at low pressure.

View product

View service

SMI 420F floating evaporators working on a lake inside a quarry

Telemet Green

SMI Evaporative Solutions

SMI 420F Evaporator

SMI 420F floating evaporator for ponds with little space: low plume for less drift, 25 hp fan and particles up to 4.7 mm without prefiltering.

View product

View service

SMI Kid PoleCat mobile evaporator on its wheeled carriage

Telemet Green

SMI Evaporative Solutions

SMI Kid PoleCat Evaporator

SMI Kid PoleCat evaporator for small areas: about 30 m throw to limit drift, 16 spiral nozzles and a wheeled carriage that one operator can move.

View product

View service

SMI Mega PoleCat evaporator on its galvanized skid

Telemet Green

SMI Evaporative Solutions

SMI Mega PoleCat Evaporator

SMI Mega PoleCat evaporator for large volumes: throw of over 105 m, 45 kW fan, 359° oscillation from a touch screen and a forkable skid.

View product

View service

SMI Super PoleCat evaporators spraying water along the bank of an evaporation pond

Telemet Green

SMI Evaporative Solutions

SMI Super PoleCat Evaporator

SMI Super PoleCat evaporator for large areas: throw of over 61 m, 30 spiral nozzles, 250 l/min and a wheeled carriage to follow the wind.

View product

View service

SMI pump suspended below a float, shown out of the water

Telemet Green

SMI Evaporative Solutions

SMI Pumps

SMI pumps for evaporation systems: water supply in three sizes for 1 to 7 evaporators, stainless steel impellers and fittings, efficient intake systems.

View product

View service

SMI electrical controls on a panel stand with a weather sensor beside an evaporation pond

Telemet Green

SMI Evaporative Solutions

SMI Electrical Controls

SMI electrical controls for evaporation systems: breakers, motor controls, NEMA or IP cabinets and prefabricated control buildings for harsh sites.

View product

View service

SMI SmartH2O software main screen with evaporator status, weather data and live camera view

Telemet Green

SMI Evaporative Solutions

SMI SmartH2O Software

SMI SmartH2O software automates evaporators and pumps by wind, rain, humidity and temperature to control drift and aim for 100 % evaporation.

View product

View service

Attachments

Documents

SMI 120F Evaporator datasheet

Datasheet

en

SMI 420B Evaporator datasheet

Datasheet

en

SMI 420F Evaporator datasheet

Datasheet

en

SMI Automation Systems datasheet

Datasheet

en

SMI Kid PoleCat Evaporator datasheet

Datasheet

en

SMI Mega PoleCat Evaporator datasheet

Datasheet

en

SMI Super PoleCat Evaporator datasheet

Datasheet

en

SMI® 420F evaporator brochure

Brochure

en

Fields of application

SMI 420B evaporators on a pond bank and a floating 420F on the water, spraying at dusk

Telemet Green

Evaporation for mining

SMI mechanical evaporators lower process water volumes in mine tailings ponds without building new ponds; the 420B and 420F are the usual models.

See how it works

SMI Super PoleCat evaporators spraying over a lined produced water pond at a gas field, with snow-capped mountains behind

Telemet Green

Produced water evaporation for oil and gas

SMI mechanical evaporators reduce produced water on site, on existing containment ponds, as an alternative to pumping and hauling it to injection wells.

See how it works

Land-based SMI evaporators spraying along a pond with a concrete wall, with power transmission towers behind

Telemet Green

Evaporation for power generation

SMI mechanical evaporators lower the volume of cooling tower blowdown, settling and scrubber ponds at power plants without enlarging them.

See how it works

SMI PoleCat evaporators on wheeled carriages along the bank of a pond

Telemet Green

Food processing wastewater evaporation

SMI mechanical evaporators lower the volume of settling and evaporation ponds for food processing and agricultural wastewater, without enlarging them.

See how it works

More about SMI Evaporative Solutions

Photos

  • SMI evaporators spraying along the edge of an evaporation pond
  • Row of SMI evaporators over a pond at dusk
  • SMI evaporators working at sunset
  • Floating SMI 420F evaporators in a water body
  • Floating SMI evaporators on a pond
  • Portable SMI fan evaporator on wheels next to a pond

Frequently asked questions

What is mechanical evaporation used for?

It is used to increase water evaporation at industrial sites and in containment ponds. Whether a system is suitable has to be assessed against the conditions and goals of each site.

Which evaporation technologies does SMI offer?

The manufacturer distinguishes machines that break up the water with a fan from machines that atomize it through nozzles: the 420 and PoleCat families, respectively.

What determines the choice of evaporator?

Water chemistry, solids and particles, the space available and drift limits all play a part. The manufacturer also considers how the system will be operated.

What information is needed to assess a project?

Water volumes, a chemical analysis, weather data, a site plan and drift limits. The alternatives considered for removing or treating that water are also reviewed.

Can the operation be automated?

Yes. The manufacturer describes systems that use weather data to adjust each evaporator's flow and keep drift within the operating area.

Talk to a specialist

Tell us which equipment you are interested in and where it will work. A specialist will answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket