SMI 420B Evaporator

SMI 420B evaporator, a land-based unit on an adjustable boom for ponds of all sizes; passes particles up to 4.7 mm and works at low pressure.

The SMI® 420B is a land-based mechanical evaporator that reduces excess water in ponds of different sizes, especially at sites with large particles or highly corrosive water. The fan head sits at the end of a boom mounted on a platform and base: the boom raises and lowers, and the unit can be aimed at different horizontal and vertical angles, so the operator can work upright or angled over the pond. The standard unit is built in galvanized steel, with stainless steel fasteners and safety chain, and stands on a free-standing concrete counterweight. According to the manufacturer, the SMI 420B evaporator can run in practically any wind condition because it is not sensitive to blowback.

Applications

  • Evaporation of excess water and wastewater from the bank of ponds of various sizes.
  • Sites with large particles in the water, thanks to a manifold that passes particles up to 4.7 mm (3/16 in).
  • Highly corrosive, acidic or highly alkaline water, with the optional coatings or stainless steel construction.
  • Sites with swirling or constantly changing winds, where plume height must be adjusted to control droplet drift.

Key features

  • Flexible operation. The boom is raised or lowered by hand with an easy-to-use jack, so the evaporator can work upright or angled over the pond.
  • Adjustable plume height. Changing the plume height controls droplet drift and, according to the manufacturer, improves efficiency in changing winds and raises evaporation thanks to a longer hang time.
  • High performance. A 12-blade stainless steel fan rotating at 3,600 rpm creates a droplet distribution suited to evaporation. The manufacturer reports annual evaporation rates of up to 70 %, typically between 25 % and 60 %; the warmer and drier the conditions, the higher the rate.
  • Low pressure. It operates with water pressures between 1.4 and 6.9 bar (20 and 100 psi).
  • Minimal clogging. The large orifices pass particles up to 4.7 mm (3/16 in), which avoids prefiltering, filter cleaning and clogged nozzles.
  • Easy maintenance. The motor is lubricated for life, so there is no weekly bearing greasing, and a vibration sensor shuts down the motor before residue or ice buildup causes a failure.
  • Heavy industrial construction. The control panel, motor enclosure, manifold and fan blade are made of stainless steel for durability in harsh environments.

Technical data

Type Land-based mechanical evaporator on a boom
Fan Stainless steel, 508 mm (20 in) diameter, 12 blades
Fan motor 18.6 kW (25 hp), premium efficiency
Fan speed 3,600 rpm at 480 V, 3-phase, 60 Hz; 2,900 rpm at 400 V, 50 Hz
Fan height 6.1 m (20 ft) in the full upright position
Base footprint 2.4 × 2.4 m (8 × 8 ft)
Counterweight Free-standing concrete, one ton
Spray manifold flow 95 l/min (25 gpm) at 7 bar (100 psi)
Operating pressure 1.4–6.9 bar (20–100 psi)
Maximum particle size 4.7 mm (3/16 in)
Power cord 45 m (150 ft)

Versions and accessories

A ball valve controls flow to the spray manifold as weather conditions change, and the stainless steel control panel has start and stop buttons. SMI also builds the unit in customized materials on request. Options:

  • For acidic or highly alkaline water or very corrosive environments: chemical-resistant coating on the boom, platform and base frame, or a stainless steel boom.
  • Boom with 180-degree option.
  • Y-line manual flush filter for dirtier water.
  • Automation that starts and stops the evaporator according to wind speed and direction, temperature and humidity.

Telemet support

Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI 420B in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

SMI 420B Evaporator datasheet

Datasheet

en

Compatible equipment

Related equipment and services

SMI 420F floating evaporators working on a lake inside a quarry

Telemet Green

SMI Evaporative Solutions

SMI 420F Evaporator

SMI 420F floating evaporator for ponds with little space: low plume for less drift, 25 hp fan and particles up to 4.7 mm without prefiltering.

View product

View service

SMI Super PoleCat evaporators spraying water along the bank of an evaporation pond

Telemet Green

SMI Evaporative Solutions

SMI Super PoleCat Evaporator

SMI Super PoleCat evaporator for large areas: throw of over 61 m, 30 spiral nozzles, 250 l/min and a wheeled carriage to follow the wind.

View product

View service

SMI electrical controls on a panel stand with a weather sensor beside an evaporation pond

Telemet Green

SMI Evaporative Solutions

SMI Electrical Controls

SMI electrical controls for evaporation systems: breakers, motor controls, NEMA or IP cabinets and prefabricated control buildings for harsh sites.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket