The SMI® Super PoleCat is a long-throw mechanical evaporator that sprays water more than 61 m (200 ft) to evaporate excess water efficiently over large areas. Its fan and barrel generate high air velocity which, combined with the optimized droplets produced by 30 spiral nozzles, accelerates evaporation. The SMI Super PoleCat evaporator is mounted on a three-wheel carriage with a tow bar, so operators can quickly reposition it as wind direction and speed change. According to the manufacturer, it is easy to use and maintain, energy efficient and quiet, and it operates best at pressures between 5.5 and 8.3 bar (80 and 120 psi).
Applications
- Evaporation of wastewater and excess water over large ponds and areas.
- Operations that reposition the evaporator around the site to follow the wind.
- Sites with swirling or changing winds, where plume height must be adjusted to control drift.
- Highly corrosive or caustic environments, with alternative materials, coatings and motor options.
Key features
- Mobility. The galvanized three-wheel carriage, with tow bar, wheel lock and three leveling and anchor jacks, makes it easy to move and set up the unit.
- Adjustable plume height. A hand jack raises and lowers the angle of the water plume to control droplet drift; according to the manufacturer, this improves efficiency in changing winds and raises evaporation thanks to a longer hang time.
- Performance. The manufacturer reports annual evaporation rates of up to 75 %, with averages typically between 25 % and 65 %, depending on ambient temperature, relative humidity, water make-up and wind.
- Nozzles that resist fouling. Thirty Teflon® spiral nozzles reduce fouling and clogging and are easy to clean; an optional water filter helps with prefiltering.
- Easy maintenance. The fan motor is built for long life in wet conditions, and pre-lubricated sealed bearings remove the need for weekly or monthly lubrication.
- Durable construction. Critical components are made of stainless steel for extended life in harsh environments.
Technical data
| Type | Mobile long-throw mechanical evaporator |
|---|---|
| Throw | More than 61 m (200 ft) |
| Fan | Aluminum, type W, 838 mm (33 in) diameter, 7 blades |
| Fan motor | 18.6 kW (25 hp), premium efficiency |
| Fan speed | 1,800 rpm at 480 V, 3-phase, 60 Hz; 1,450 rpm at 400 V, 50 Hz |
| Airflow | About 44,200 m³/h (26,000 cfm) |
| Flow rate | 250 l/min (65 gpm) at 7 bar (100 psi) |
| Optimum operating pressure | 5.5–8.3 bar (80–120 psi) |
| Nozzles | 30 Teflon® spiral nozzles on a stainless steel manifold |
| Power cord | 45 m (150 ft) |
Versions and accessories
The stainless steel control panel has start and stop buttons, and other voltages and frequencies are available. Options:
- Mounts: three-wheel galvanized A-frame carriage as standard, or a three-wheel galvanized carriage with enclosed turntable and oscillator, or a tower mount.
- Oscillation.
- Y-line manual flush filter for dirtier water.
- Automation that shuts down and starts up the evaporator according to wind speed and direction, temperature and humidity.
- For highly corrosive or caustic environments, other materials of construction and coatings, and chemical-duty or explosion-resistant motors.
Telemet support
Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI Super PoleCat in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
