The SMI® Mega PoleCat is the long-throw machine in the SMI range, designed to evaporate large volumes of water over large areas with a throw of more than 105 m (350 ft). It is mounted on a portable galvanized skid with fork pockets and combines a 45 kW (60 hp) fan, an electric head jack, a turntable with menu-driven oscillation of up to 359 degrees, and a control panel with PLC and touch screen. SMI configures the SMI Mega PoleCat evaporator for each site: nozzle sizes, water pressure, flow rates and particle sizes are matched to the water and the local weather conditions to get the most out of the machine.
Applications
- Evaporation of large volumes of excess water or wastewater over large ponds and areas.
- Sites that need to adjust the direction and arc of the spray to varying wind conditions.
- Projects where flow rate and pressure must be matched to the site’s own pumping equipment, with an optional on-board booster pump.
- Harsh outdoor environments, with critical components in galvanized and stainless steel.
Key features
- Long throw. The specially designed high-velocity fan maximizes spray throw and coverage area.
- Performance. According to the manufacturer, typical evaporation rates are between 20 % and 80 % of the water that passes through the machine, depending on water chemistry, temperature, humidity, wind and water temperature.
- Flexible flow rates. Nozzles, water pressure and flow rates can be configured to reach the best evaporation efficiency for each need.
- Menu-driven oscillation. On the touch screen, the operator sets the start and stop points of the arc the machine sweeps, and can rotate the unit automatically to follow the wind. A manual lever allows the machine to be pivoted horizontally by hand without power.
- Electric head jack. A push-button jack raises and lowers the head to achieve the desired throw.
- Easy maintenance. The fan motor is built for long life in wet conditions, and pre-lubricated sealed bearings remove the need for weekly or monthly lubrication.
- Portable mount. The galvanized skid with fork pockets, enclosed turntable and oscillator can be moved with a forklift.
Technical data
| Type | Long-throw mechanical evaporator on a skid |
|---|---|
| Throw | More than 105 m (350 ft) |
| Fan | Aluminum, type W, 7 blades |
| Fan motor | 45 kW (60 hp), premium efficiency |
| Motor speed | 1,800 rpm at 480 V, 3-phase, 60 Hz |
| Nozzles | 30, on a stainless steel spray manifold |
| Flow rate | 659 l/min (174 gpm) at 13.8 bar (200 psi) or 568 l/min (150 gpm) at 10.3 bar (150 psi), or custom |
| Oscillation | Up to 359°, user-defined from the touch screen |
| Controls | Control panel with PLC, touch screen and start and stop buttons |
| Power cord | 30 m (100 ft), longer on request |
Versions and accessories
Other voltages and frequencies are available. Options listed by the manufacturer:
- Oscillation.
- On-board booster pump for water pressure boost; a 30 hp float pump is also shown as an option.
- Heated spray manifold upgrade.
- Y-line manual flush filter for dirtier water.
- Automation that shuts down and starts up the evaporator according to wind speed and direction, temperature and humidity.
Telemet support
Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI Mega PoleCat in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
