SMI Kid PoleCat Evaporator

SMI Kid PoleCat evaporator for small areas: about 30 m throw to limit drift, 16 spiral nozzles and a wheeled carriage that one operator can move.

The SMI® Kid PoleCat is a short-throw mechanical evaporator for small areas: it sprays water about 30 m (100 ft) in calm conditions, so droplet drift stays within a smaller area and it can be used where larger machines cannot. Its fan and barrel produce high air velocity that, combined with optimized droplets from 16 spiral nozzles, accelerates evaporation. The SMI Kid PoleCat evaporator sits on a three-wheel carriage with a tow bar, so a single operator can reposition it as wind direction and speed change. According to the manufacturer, it is easy to use and maintain, energy efficient and quiet.

Applications

  • Evaporation of wastewater and excess water in small ponds or areas.
  • Sites where drift must be kept within a short distance and a long-throw machine does not fit.
  • Operations that move the evaporator around the site to follow the wind.
  • Highly corrosive or caustic environments, with alternative materials, coatings and motor options.

Key features

  • Mobility. The three-wheel carriage with tow bar and wheel lock lets one operator move the unit to take advantage of changing wind direction and speed.
  • Short throw. A throw of about 30 m (100 ft) and a low plume height shorten drift distance and allow longer operation in swirling or changing winds.
  • Performance. The manufacturer reports annual evaporation rates of up to 75 %, with averages typically between 25 % and 65 %, depending on ambient temperature, relative humidity, water make-up and wind.
  • Nozzles that resist fouling. Sixteen Teflon® spiral nozzles reduce fouling and clogging and are easy to clean; an optional water filter helps with prefiltering.
  • Adjustable plume. A hand jack raises and lowers the angle of the water plume, and two anchoring jacks hold the unit in place.
  • Easy maintenance. The fan motor is built for long life in wet conditions, and pre-lubricated sealed bearings remove the need for weekly or monthly lubrication.

Technical data

Type Mobile mechanical evaporator on wheels
Throw About 30 m (100 ft) in calm conditions
Fan Aluminum, 635 mm (25 in) diameter, 6 blades
Fan motor 5.6 kW (7.5 hp)
Fan speed 1,800 rpm at 480 V, 3-phase, 60 Hz; 1,450 rpm at 400 V, 50 Hz
Airflow About 15,300 m³/h (9,000 cfm)
Flow rate 132 l/min (35 gpm) at 7 bar (100 psi)
Optimum operating pressure 5.5–8.3 bar (80–120 psi)
Nozzles 16 Teflon® spiral nozzles
Power cord 45 m (150 ft)

Versions and accessories

The carriage is painted or galvanized, and the plastic control panel has start and stop buttons. Options include oscillation and an optional water filter. For highly corrosive or caustic environments, SMI can substitute materials of construction and coatings to match the site, and offers chemical-duty or explosion-resistant motors.

Telemet support

Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI Kid PoleCat in service, with spare parts, technical service and training. Ask a specialist about availability for your project.

Video

More information

SMI Kid PoleCat Evaporator datasheet

Datasheet

en

Compatible equipment

Related equipment and services

SMI Super PoleCat evaporators spraying water along the bank of an evaporation pond

Telemet Green

SMI Evaporative Solutions

SMI Super PoleCat Evaporator

SMI Super PoleCat evaporator for large areas: throw of over 61 m, 30 spiral nozzles, 250 l/min and a wheeled carriage to follow the wind.

View product

View service

SMI Mega PoleCat evaporator on its galvanized skid

Telemet Green

SMI Evaporative Solutions

SMI Mega PoleCat Evaporator

SMI Mega PoleCat evaporator for large volumes: throw of over 105 m, 45 kW fan, 359° oscillation from a touch screen and a forkable skid.

View product

View service

SMI 120F evaporators spraying water over an industrial pond

Telemet Green

SMI Evaporative Solutions

SMI 120F Evaporator

SMI 120F floating evaporator for small ponds: tilting head from 0 to 90° to control drift, foam-filled pontoons and a low-clog manifold.

View product

View service

Discuss this equipment

Tell us where and how you plan to use it. A specialist will review the requirements with you and answer by email.

We use these details to answer your inquiry, as explained in our privacy policy.

Shopping Basket