The SMI® 420F is a floating mechanical evaporator that reduces excess water in small areas, especially at sites with large particles or highly corrosive water. It rests on plastic pontoons filled with closed-cell foam and works from the pond itself, so it takes up no room around the edge. Its low plume height shortens the drift distance of the droplets and, according to the manufacturer, allows longer operation in swirling or changing winds. The SMI 420F floating evaporator combines a 25 hp fan motor, a stainless steel submersible pump and heavy industrial construction, with the control panel, motor enclosure, manifold and fan blade in stainless steel.
Applications
- Evaporation of excess water and wastewater in ponds with limited space around them.
- Water with large particles, since the unit passes particles up to 4.7 mm (3/16 in) without prefiltering.
- Acidic or highly alkaline water and highly corrosive environments, with stainless steel construction and acid-resistant coating as options.
- Sites with variable winds, where a low plume helps keep droplet drift within a shorter distance.
Key features
- Floating unit. Four UV-stabilized polyethylene pontoons filled with closed-cell polyurethane foam keep the unit afloat even if the outer shell is accidentally punctured.
- Low plume height. A shorter drift distance allows the evaporator to keep running in swirling or changing winds.
- High performance. A 12-blade stainless steel fan rotating at 3,600 rpm creates a droplet distribution suited to evaporation. The manufacturer reports annual evaporation rates of up to 70 % with the 420F, typically between 25 % and 60 %, depending on temperature, relative humidity, water make-up and wind.
- Minimal clogging. The large orifices pass particles up to 4.7 mm (3/16 in), which reduces prefiltering, filter cleaning and clogged nozzles.
- Low buildup and small footprint. A minimal top surface area limits residue and ice buildup, so cleanup and maintenance are reduced.
- Easy maintenance. The motor is lubricated for life, so the bearings need no weekly greasing.
- Motor protection. A vibration sensor shuts down the motor before residue or ice buildup causes a catastrophic failure.
Technical data
| Type | Floating mechanical evaporator |
|---|---|
| Fan | Stainless steel, 508 mm (20 in) diameter, 12 blades |
| Fan motor | 18.6 kW (25 hp), premium efficiency |
| Fan speed | 3,600 rpm at 480 or 575 V, 3-phase, 60 Hz; 2,900 rpm at 400 V, 50 Hz |
| Pump | 1.5 kW (2.0 hp) stainless steel submersible pump |
| Pump voltage options | 460 V / 60 Hz, 400 V / 50 Hz or 575 V / 60 Hz |
| Spray manifold flow | Up to 95 l/min (25 gpm) |
| Floats | 4 UV-stabilized polyethylene pontoons filled with closed-cell polyurethane foam |
| Maximum particle size | 4.7 mm (3/16 in) |
| Power cord | 61 m (200 ft) |
Versions and accessories
The frame is galvanized steel with stainless steel fasteners. On manual units, a ball valve regulates flow to the spray manifold as weather conditions change; automated units use a VFD. The stainless steel control panel has start and stop buttons. Options:
- Stainless steel construction and acid-resistant coating for acidic or highly alkaline water.
- Y-line manual flush filter for dirtier water.
- Automation that shuts down and starts up the evaporator according to wind speed and direction, temperature and humidity.
Telemet support
Telemet’s team works with SMI to advise on the right configuration for each operation and to support the SMI 420F in service, with spare parts, technical service and training. Ask a specialist about availability for your project.
